SUMMIT CK55ADASINKL Dishwasher

1

Dishwasher Installation for a CK72ADA/CK54ADA Kitchenette  

This kitchenette can be modified to accept an 18” wide dishwasher sized for use under  

ADA-compliant counters. We recommend the Summit DW18SS4ADA.  

1. Open the door of the 18” wide cabinet of your kitchenette (located to the right of the sink in the  

CK72ADASINKL, and to the left of the sink in the CK72ADASINKR).  

a. NOTE: The CK54 model will include TWO doors.  

2. Remove the two screws (one at the top and one at the bottom) on the hinge side of the door.  

a. For the CK54 model, remove the screws of the hinges on each door.  

3. Locate the front support bar at the bottom front of the cabinet. Remove the screws on the left  

and the right side of the bar, which attach it to the sides of the cabinet.  

4. Remove the middle shelf by unscrewing the two screws underneath the front lip of the shelf, and  

the two screws in the back of the shelf, holding it to the walls of the cabinet.  

5. Remove the four screws attaching the bottom shelf to the cabinet, and slide the bottom shelf out  

of the unit.  

NOTE: Leave the back, mid-height support bar in place. It will provide structure to the unit once the  

shelves are removed.  

6. A hole will need to be drilled in the sink-side wall of the cabinet to accommodate the water intake  

and drain hoses. The hole should be approximately 2” in diameter. It is recommended to line the  

inside of the drilled hole with a rubber grommet to prevent the metal from cutting into the drain  

hose.  

7. Feed the intake and drain hoses through the hole. As you push the dishwasher back into the  

combo kitchen, make sure to tuck the hoses into the channel at the bottom rear of the  

dishwasher. There should be sufficient room for both hoses when the dishwasher is pushed  

back to be flush with the front of the combo kitchen.  

Summit Appliance Division · Felix Storch, Inc. · www.summitappliance.com · 718-893-3900 · info@summitappliance.com  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	SUMMIT CK55ADASINKL Dishwasher
Make	SUMMIT
Language	English
Filetype	PDF (Download)
File size	0.05 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• SUMMIT

SUMMIT CK55ADASINKL Dishwasher Overview

Summary of Contents

• Page 1: Dishwasher installation for a CK72ADA/CK54ADA kitchenette can be modified to accept an 18” wide dishwasher. It is recommended to use the Summit DW18SS4ADA. Open the door of the 18” wide cabinet of your kitchenette. Remove the two screws on the hinge side of the door. Locate the front support bar at the bottom front of the cabinet and remove the screws. Remove the middle shelf by unscrewing the screws underneath and at the back. Remove the four screws attaching the bottom shelf to the cabinet. A hole will need to be drilled in the sink-side wall of the cabinet for the water intake and drain hoses. Feed the intake and drain hoses through the hole and ensure they are tucked into the channel at the bottom rear of the dishwasher.