AEG FSE73800RO Dishwasher

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

EN User Manual  

FSE73800RO  

Dishwasher  

USER  

MANUAL  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	AEG FSE73800RO Dishwasher
Make	AEG
Language	English
Filetype	PDF (Download)
File size	0.9 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• AEG
• ALL DISHWASHER INSTRUCTIONS & USER MANUALS

AEG FSE73800RO Dishwasher Overview

Summary of Contents

• Page 1: User manual for the FSE73800RO dishwasher.
• Page 2: SAFETY INFORMATION SAFETY INSTRUCTIONS PRODUCT DESCRIPTION CONTROL PANEL PROGRAMME SELECTION BASIC SETTINGS BEFORE FIRST USE DAILY USE HINTS AND TIPS CARE AND CLEANING Adherence to the directions for use in this manual is extremely important for health and safety. Failure to strictly adhere to the requirements in this manual may result in personal injury, property damage and affect your ability to make a claim under the AEG manufacturer’s warranty. Products must be used, installed and operated in accordance with this manual. Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years. Please spend a few minutes reading to get the very best from it. Always use original spare parts. When contacting our Authorised Service Centre, ensure that you have the following data available: Model, PNC, Serial Number. The information can be found on the rating plate. Warning / Caution-Safety information.
• Page 3: Environmental information is subject to change without notice. Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities if they have been given supervision or instruction. Children between 3 and 8 years of age and persons with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. Children of less than 3 years of age should be kept away from the appliance unless continuously supervised. Children should be supervised to ensure that they do not play with the appliance. Keep detergents away from children. Children shall not carry out cleaning and user maintenance of the appliance without supervision.
• Page 4: - The appliance is intended for use in farm houses, staff kitchen areas, and residential environments like hotels and bed & breakfasts. - Do not change the specification of this appliance. - The operating water pressure must be between 0.5 and 10 bar. - Obey the maximum number of 15 place settings. - If the supply cord is damaged, it must be replaced by a qualified person to avoid a hazard. - Put knives and cutlery with sharp points in the cutlery basket with the points down. - Do not leave the appliance with the door open to avoid a tripping hazard. - Before maintenance, deactivate the appliance and disconnect it from the mains. - Do not use high pressure water sprays or steam to clean the appliance. - Only a qualified person must install this appliance.
• Page 5: Do not use the appliance before installing it in the built-in structure due to safety manner. Follow the installation instructions supplied with the appliance. Always take care when moving the appliance as it is heavy. Do not install or use the appliance where the temperature is less than 0 °C. Ensure that there are no visible water leaks during and after the first use of the appliance. If the water inlet hose is damaged, immediately close the water tap and disconnect the mains plug from the mains socket. The appliance must be earthed. Always use a correctly installed shockproof socket. Do not put flammable products or items that are wet with flammable products in, near or on the appliance. Do not drink and play with the water in the appliance.
• Page 6: This appliance has an internal lamp that comes on when you open the door and goes off when the door is closed. To replace the internal lighting, contact the Authorised Service Centre. To repair the appliance contact the Authorised Service Centre. Use original spare parts only. Self-repair or non-professional repair can have safety consequences and might void the guarantee. These lamps are intended to withstand extreme physical conditions in household appliances. Disconnect the appliance from the mains supply before disposal. Cut off the mains cable and discard it. Remove the door catch to prevent children and pets from getting closed in the appliance. Product description includes various components such as spray arms, filters, and dispensers. The rating plate is also part of the product description.
• Page 7: The lamp goes off when you close the door or switch the appliance off. Otherwise, it goes off automatically after some time to save energy. The appliance has an internal lamp. It comes on when you open the door or switch the appliance on while the door is open. The control panel includes an On/Off button, Delay Start button, Display, EXTRAS buttons, and AUTO Sense program button. The ECOMETER indicates how the programme selection impacts energy and water consumption. The more bars are on, the lower the consumption is. The ECOMETER indicates the most environmentally friendly programme selection for a normally soiled dishwashing load. The rinse aid indicator is on when the rinse aid dispenser needs refilling. The Machine Care indicator is on when the appliance needs internal cleaning with the Machine Care programme. The drying phase indicator is on when a programme with the drying phase is selected. It flashes when the drying phase operates.
• Page 8: Programme selection allows you to choose the wash cycle based on temperature and time. SprayZone is suitable for dishwashing items with stubborn soil, such as pots and pans. Using the MY TIME selection bar, you can select a wash cycle based on programme duration. Ensure that items in the SprayZone do not block the upper spray arm. ExtraPower is the shortest programme (30min) for washing lightly soiled loads. The 1h programme is suitable for washing loads with fresh and lightly dried-on soil. The 1h 30min programme is for washing and drying normally soiled items. The 2h 40min programme is for washing and drying heavily soiled items. ECO is the longest programme (3h) for efficient energy and water use with normal soil. GlassCare prevents damage to delicate items by controlling temperature changes during washing.
• Page 9: Programmes overview Dishwasher programmes are designed for different degrees of soil. Quick programme is suitable for fresh, lightly dried-on crockery and cutlery. ExtraPower and GlassCare options enhance cleaning performance. Normal programme is for crockery, cutlery, and pots with normal to heavy soil. ECO programme is energy-efficient for lightly dried-on items. AUTO Sense adjusts the wash cycle based on the load. Machine Care is for cleaning the appliance interior. Cleaning programme operates at 70 °C for thorough cleaning. AirDry feature allows automatic door opening during drying. Refer to Care and Cleaning for maintenance instructions.
• Page 10: Consumption values for water, energy, and duration are provided for various programmes. The pressure, temperature, mains supply variations, options, quantity of dishes, and degree of soil can change the values. Values for programmes other than ECO are indicative only. For performance tests, include the product number code (PNC) from the rating plate. You can configure the appliance by changing basic settings according to your needs. Rinse aid level can be adjusted from level 0A to level 6A. The end sound can be activated or deactivated for the end of a programme. Auto door open feature can be activated or deactivated. Key tones can be activated or deactivated when buttons are pressed. Latest programme selection can be enabled or disabled for automatic selection of the most recently used programme.
• Page 11: Settings Activate or deactivate the TimeBeam. You can change the basic settings in setting mode. To enter setting mode, press and hold simultaneously for about 3 seconds. The order of the basic settings presented in the table is also the order of the settings on the ECOMETER. Make sure the appliance is in setting mode. Use Previous or Next to select the bar of the ECOMETER dedicated to the desired setting. Press OK to enter the setting. The new setting is saved. The saved settings remain valid until you change them again. The rinse aid helps to dry the dishes without streaks and stains.
• Page 12: Rinse aid is automatically released during the hot rinse phase. The rinse aid indicator notifies when to refill rinse aid. For best drying performance, always use rinse aid and keep the rinse aid indicator active. Deactivate AirDry if children have access to the appliance. You can deactivate the click sound of the control panel buttons. An acoustic signal sounds when the programme is completed or if a malfunction occurs. The latest programme completed before deactivation is saved and selected automatically. AirDry improves drying results by automatically opening the appliance door during the drying phase. TimeBeam displays information on the floor below the appliance door. The programme duration and remaining time are shown during operation.
• Page 13: Delay and the countdown duration when the delay start begins. An alarm code when the appliance has a malfunction. When AirDry opens the door, TimeBeam is off. To check the remaining time of the running programme, look at the control panel display. Before first use: Fill the rinse aid dispenser. Open the water tap. The compartment is for rinse aid only. Start the Quick programme to remove any residuals from the manufacturing process. How to fill the rinse aid dispenser: Only use rinse aid designed specifically for dishwashers. Fill the dispenser until the rinse aid reaches the marking MAX. Remove the spilled rinse aid with an absorbent cloth to prevent excessive foam formation. Daily use: Open the water tap. Fill the rinse aid dispenser if it is empty. Load the baskets. Add the detergent. Select and start a programme. Close the water tap when the programme is complete.
• Page 14: How to activate EXTRAS Only use detergent specifically designed for dishwashers. Select a programme using MY TIME selection bar. Press the button dedicated to the option you want to activate. Put the detergent (gel, powder or tablets) in the compartment. If the programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. The display shows the updated programme duration. By default, options must be activated every time before you start a programme. Not all options are compatible with each other. Activating options often increases the water and energy consumption as well as the programme duration. How to select and start a programme using MY TIME selection bar.
• Page 15: Opening the door while a programme is running stops the appliance. It may affect the energy consumption and the programme duration. After closing the door, the appliance continues from the point of interruption. Press repeatedly until the display shows the desired delay time (from 1 to 24 hours). The light related to the button is on. Close the appliance door to start the countdown. During the countdown, it is not possible to change the delay time and the programme selection. The Auto Off function saves energy by switching the appliance off when it is not operating. When the programme is complete, the display shows 0:00. The appliance returns to the programme selection. Make sure that there is detergent in the detergent dispenser before you start a new programme. You can use dishwasher detergent and rinse aid separately or you can use the multi-tablets. Follow the instructions on the packaging. Select a programme according to the type of load and the degree of soil. ECO offers the most efficient use of water and energy consumption for crockery and cutlery with normal soil. Remove larger residues of food from the dishes into the waste bin. Do not pre-rinse dishes by hand. When needed, select a programme with a prewash phase. Always use the whole space of the baskets. Make sure that items in the baskets do not touch or cover each other. Only then can the water completely reach and wash the dishes.
• Page 16: Make sure that the spray arms can move freely before you start a programme. Detergent tablets do not fully dissolve with short programmes. To prevent detergent residues on the tableware, we recommend that you use the tablets with long programmes. The filters are clean and correctly installed. The spray arms are not clogged. There is dishwasher rinse aid unless you use multi-tablets. Always use the whole space of the baskets. Use the appliance to wash dishwasher-safe items only. Do not wash in the appliance items made of wood, horn, aluminium, pewter and copper. Machine Care is a programme designed to clean the appliance interior with optimal results.
• Page 17: How to start the machine Before starting the machine, clean the filters and spray arms. Use a descaler or a cleaning product designed specifically for dishwashers. Press and hold simultaneously for about 3 seconds. The display shows the programme duration. Close the appliance door to start the programme. Clean the appliance interior with a soft damp cloth. Do not use abrasive products, abrasive cleaning pads, sharp tools, strong chemicals, scourer or solvents. To maintain the performance of your appliance, use a cleaning product designed specifically for dishwashers at least once every two months. The filter system is made of 3 parts.
• Page 18: Cleaning the lower spray arm is recommended to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. To remove the lower spray arm, pull it upwards. Wash the spray arm under running water and use a thin pointed tool to remove particles of soil from the holes. Make sure there are no residues of food or soil in or around the edge of the sump. Reassemble the filters and ensure they are correctly positioned. Put back the filter in the flat filter and turn it clockwise until it locks. To install the spray arm back, press it downwards. An incorrect position of the filters can cause bad washing results and damage to the appliance.
• Page 19: Cleaning the upper spray arm is recommended to prevent soil from clogging the holes. Clogged holes can cause unsatisfactory washing results. To detach the spray arm from the basket, press the spray arm upwards and simultaneously turn it clockwise. Cleaning the ceiling spray arm is also recommended to prevent soil from clogging the holes. The ceiling spray arm is placed on the ceiling of the appliance and is installed in the delivery tube with the mounting element. To detach the spray arm from the delivery tube, turn the mounting element counterclockwise and pull the spray arm downwards. Wash the spray arm under running water and use a thin pointed tool to remove particles of soil from the holes. Run water through the holes to wash soil particles away from the inside. To install the spray arm back, press the spray arm upwards and simultaneously turn it counterclockwise until it locks into place.
• Page 20: To install the spray arm back, insert the mounting element in the spray arm and fix it in the delivery tube by turning it clockwise. Improper repair of the appliance may pose a danger to the safety of the user. Any repairs must be performed by qualified personnel. Refer to the below table for information on possible problems. With some problems, the display shows an alarm code. The majority of problems that may occur can be solved without the need for service. Make sure that the mains plug is connected to the mains socket. Make sure that the appliance door is closed. Make sure that the water tap is open. Make sure that the sink spigot is not clogged.
• Page 21: Problem and alarm code The anti-flood device is on. The display shows i30. Close the water tap and contact an Authorised Service Centre. The appliance stops and starts more times during operation. It is normal. It provides optimal cleaning results and energy savings. The programme lasts too long. If the delay start option is set, cancel the delay setting or wait for the end of the countdown. Activating options can increase the programme duration. The displayed programme duration is different than the duration in the consumption values table. The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the programme duration. The remaining time in the display increases and skips nearly to the end of the programme duration. This is not a defect. The appliance is working correctly. Small leak from the appliance door. The appliance is not levelled. Loosen or tighten the adjustable feet. The appliance door is difficult to close. Parts of the tableware are protruding from the baskets. The appliance trips the circuit-beaker. The amperage is insufficient to supply simultaneously all the appliances in use. Check the socket amperage and the capacity of the meter or turn off one of the appliances in use. WARNING! We do not recommend using the appliance until the problem has been completely fixed.
• Page 22: The product number can be accessed by pressing and holding specific buttons for about 3 seconds. The display will show the product number code (PNC) of your appliance. You need to provide the PNC when contacting an Authorised Service Centre. The PNC can also be found on the rating plate on the appliance door and on the control panel. For poor washing results, refer to Daily use, Hints and tips, and the basket loading leaflet. Activate the SprayZone option for heavy or stubborn soil and the ExtraPower option to improve washing results. Clean spray arm jets and filter to enhance performance. For poor drying results, activate AirDry to improve drying performance. Ensure there is sufficient rinse aid and adjust the level if necessary. Whitish streaks or bluish layers on dishes may indicate issues with rinse aid quantity or detergent levels.
• Page 23: Problem Possible cause and solution Unusual foam during washing. Use the detergent designed specifically for dishwashers. Do not pre-rinse dishes under running water. Traces of rust on cutlery. Do not put silver and stainless steel items close together. Residues of detergent in the dispenser at the end of the programme. Make sure that the spray arms are not blocked or clogged. Odours inside the appliance. Start the Machine Care programme with a descaler or a cleaning product designed for dishwashers. Dull, discoloured or chipped tableware. Make sure that only dishwasher-safe items are washed in the appliance.
• Page 24: Water supply pressure should be between 0.5 - 10 bar and 50 - 1000 kPa. The minimum water supply temperature is 5 °C. The capacity for cold water is 15 place settings. For best washing performance, a cold water connection is recommended. Remove the entire plastic membrane from the sink trap spigot and fit the drain hose with a clamp. There should be a minimum 2mm gap between the top of the dishwasher and the underside of the bench top. The hose should not be extended by more than 2 metres. Secure the dishwasher with brackets or screws provided, ensuring a maximum of 600mm and a minimum of 300mm clearance. Adjust leveling legs if the floor is not level. Install the appliance under a kitchen counter, adjacent to a water tap and drain.
• Page 25: Adjusting the level of the appliance allows the door to close and seal properly. Connect the inlet hose to a water tap with an external BSP thread spout of 3/4''. For best washing performance, it is recommended to connect the appliance to a cold water supply. The highest point of the drain hose must be no more than 600 mm from the floor and must have a continuous fall to the plumbing connection. Energy savings can be made by connecting the appliance to a solar water system and using economy options, however the water temperature must not exceed 60° C. The drain hose can be lengthened using additional lengths and connectors, which must be purchased from Electrolux spare parts. Water pressure should be a maximum of 1000 kPa and a minimum of 50 kPa. If water pressure exceeds 1000 kPa, a pressure reducing valve should be used. Always use new hoses when connecting the appliance to the water mains. The water inlet hose must be examined at an interval of twelve months for deterioration and replaced if necessary.
• Page 26: This document sets out the terms and conditions of the product warranties for AEG Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should there be a manufacturing defect in your Appliance. This warranty is in addition to other rights you may have under the Australian Consumer Law. This warranty only applies to new Appliances purchased and used in Australia or New Zealand. Subject to these terms and conditions, this warranty continues for a period of 60 months in Australia and New Zealand, following the date of original purchase of the Appliance. During the Warranty Period, Electrolux or its ASC will repair or replace any parts which it considers to be defective at no extra charge if your Appliance is readily accessible for service. Electrolux may, in its absolute discretion, choose whether the remedy offered for a valid warranty claim is repair or replacement. You agree that any replaced Appliances or parts become the property of Electrolux. Electrolux will bear the reasonable cost of travel and transportation for warranty service.
• Page 27: Transportation, travel and delivery of the appliance to and from Electrolux or its ASC will be arranged by Electrolux as part of any valid warranty claim. Proof of purchase is required before you can make a claim under this warranty. You may not make a claim under this warranty unless the defect claimed is due to faulty or defective parts or workmanship. This warranty does not cover light globes, batteries, filters or similar perishable parts. For Appliances and services provided by Electrolux in Australia, Electrolux goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. For Appliances and services provided by Electrolux in New Zealand, the Appliances come with a guarantee by Electrolux pursuant to the provisions of the Consumer Guarantees Act. Electrolux is not liable under this warranty if the appliance has been used for purposes other than those for which the appliance was intended. If you make a warranty claim, Electrolux and its agents may exchange information in relation to you to enable Electrolux to meet its obligations under this warranty.
• Page 28: Page 28