Home > Wexiodisk > Wexiodisk WD-ACS 47D Cutlery Dishwasher

Wexiodisk WD-ACS 47D Cutlery Dishwasher

WD-ACS 47D  
Rev. 1.0 (202003)  
Installation instructions  
3.6.3 Ventilation  
The machine’s heat load for the room is stipulated in TECHNICAL SPECIFICA-  
TIONS.  
The machine has a condensing battery connected to an exhaust fan to reduce the  
amount of steam released. Extractor fans for extracting steam can be installed  
above the infeed and outfeed openings, as well as above the area of the machine  
where steam is emitted from the condensing fan.  
If a hood is fitted over the machine, it must cover both the infeed and the outfeed.  
The front of the hood must be positioned at least 500 mm in front of the machine  
to allow access for service and repairs.  
3.6.4 Steam connection (option)  
The connection for steam (8) is fitted with a filter. The machines are supplied as  
standard without a shut-off valve for steam. A shut-off valve must be installed on  
the incoming pipe.  
3.6.5 Condensing water connection (option)  
A connection for condensation (7) is only provided on steam-heated machines.  
The pipe is connected to the system’s steam boiler.  
3.6.6 Drain/waste pipe  
The waste water system connected to (5) should consist of a 50 mm metal pipe  
that will withstand mechanical impacts. The drain must run to a floor drain (6),  
where its opening must be above the water level.  
Ensure that the drain connection is kept in place by using e.g. cable ties in the  
designated areas.  
14  
GeneralDetails
NameWexiodisk WD-ACS 47D Cutlery Dishwasher
MakeWexiodisk
LanguageEnglish
FiletypePDF (Download)
File size0.56 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Wexiodisk WD-ACS 47D Cutlery Dishwasher