Home > Wexiodisk > Wexiodisk WD-ACS 47D Cutlery Dishwasher

Wexiodisk WD-ACS 47D Cutlery Dishwasher

WD-ACS 47D  
Rev. 1.0 (202003)  
Operating instructions  
4.1.2 Preparations before filling  
Check:  
That the machine and removable parts have been cleaned. If not – clean  
them!  
That there is no dirt in the wash arm (17, 18) or rinse pipe nozzles (20, 21)  
That removable parts are correctly in place  
Amount of detergent and drying agent (option)  
That the stopcock for the water to the machine is open  
That the main switch is in the ON position  
Remember:  
Ordinary washing-up liquid must not be used in the machine or for soaking.  
Contact your detergent supplier regarding the choice of a suitable deter-  
gent. Washing-up liquid causes a build-up of foam, produces poor wash re-  
sults and can damage the machine.  
Steel wool must not be used for pre-treating the dishware.  
Only detergent and drying agent intended for industrial machines may be  
used.  
If using liquid detergent and drying agent, the same make and type of de-  
tergent and drying agent should be used.  
4.1.3 Filling and heating the machine  
The doors (14) must be closed.  
Press button (12) to switch on the power supply.  
Press button (6). The filling and heating process will begin.  
Press button (8) to activate the washing conveyor feed when the following  
text is shown in the display:  
THE MACHINE IS READY  
TO WASH  
START THE FEED  
USING THE FEED BUTTON  
N.B.: The time it takes for the machine to fill and heat up to the right washing tem-  
perature varies between 5 and 30 minutes, and depends on the temperature of  
the incoming water.  
21  
GeneralDetails
NameWexiodisk WD-ACS 47D Cutlery Dishwasher
MakeWexiodisk
LanguageEnglish
FiletypePDF (Download)
File size0.56 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

Wexiodisk WD-ACS 47D Cutlery Dishwasher