Wexiodisk WD-ACS 47D Cutlery Dishwasher
WD-ACS 47D
Rev. 1.0 (202003)
Operating instructions
4.4.2 Troubleshooting
PROBLEMS
CAUSE
ACTION
No indication on the control panel
display when the On/Off button (12)
is pressed.
The main switch is off.
Turn on the main switch.
The machine does not fill with water. The shut-off cock on the incoming
water supply is closed.
Open the tap.
The doors are open.
Close the doors.
Fit the level pipe.
The tanks overfill.
The level pipe is not in place.
The level pipe's rubber sleeve is
not sealing against the bottom
plate.
Check that the level pipe is
closed. Change the rubber sleeve
if it is damaged.
The machine does not start washing. The doors are not closed.
Close the doors.
Outward feed conveyor limit switch
has been activated.
Remove any cutlery from the limit
switch.
Noise from the washing pump.
Low water level. Foam in the tank. Check the level. Change the wa-
ter.
The machine is not cleaning proper- The rinsing and washing nozzles
ly.
Check and clean the nozzles.
are clogged with dirt.
There is too little detergent.
Check that there is sufficient de-
tergent in the machine.
The water in the tanks is too dirty.
Change the water.
Dirt has dried on the dishware to
be washed.
Soak the dishware before wash-
ing.
Dishware does not dry.
Rinse is defective.
Check rinse temperature and
flow.
The rinse nozzles are blocked.
Too little drying agent.
Check and clean the nozzles.
Check that there is sufficient dry-
ing agent in the machine.
When you contact the service personnel, you will need to answer the following
questions about the machine:
•
Machine type and model
•
•
•
Machine serial number and installation date
Brief description of the fault/problem
What happened/was being done immediately before the fault occurred
29
| General | Details |
|---|---|
| Name | Wexiodisk WD-ACS 47D Cutlery Dishwasher |
| Make | Wexiodisk |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.56 MB |
















































