Whirlpool Thron Dishwasher
Daily Reference Guide
CLEANING THE SPRAY ARMS
EN
On occasions, food residue
may become encrusted onto
the spray arms and block the
holes used to spray the water.
It is therefore recommended
that you check the arms from
time to time and clean them
The lower spray arm may be removed
by pulling it upwards and rotating it an-
ti-clockwise. Mounting back the spray
arm is by pulling it down and rotating it
clockwise.
with
a
small non-metallic
brush.
The top spray arm may be removed by
pressing it up and then rotating it anti-c-
lockwise. Mounting back the spray arm
is by pulling it upwards and rotating it
clockwise.
To remove the upper spray you
must remove it together with
the manifold.
TROUBLESHOOTING
In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list.
For other errors or issues please contact authorized After-sales Service whose contact details can be found in the warranty booklet.
Spare parts will be available for a period of either up to 7 or up to 10 years, according to the specific Regulation requirements.
PROBLEMS
POSSIBLE CAUSES
SOLUTIONS
The salt indicator
is lit
Refill the reservoir with salt (for more information - see FILLING THE SALT RESERVOIR). Check the
water hardness setting if necessary (see WATER HARDNESS TABLE).
Salt reservoir is almost empty.
The salt indicator
is blinking
Refill the reservoir with salt as soon as possible. Using the appliance without salt may cause
damage to its internal components.
Salt reservoir is empty.
The rinse aid
indicator is lit or
blinking
Rinse aid dispenser is empty. (After refill the rinse
aid indicator may remain lit for a short time).
Refill the dispenser with rinse aid (for more information - see FILLING THE RINSE AID DISPENSER).
Descale indicator
Descale the appliance immediately using the Self Clean program and a commercially available
descaling product (see OPTIONS AND FUNCTIONS). Refill the reservoir with salt. Check the
water hardness setting. If the appliance is not descaled, it will stop functioning.
is lit or blinking; Limescale is accumulating on internal components
"dES" alarm is
displayed.
of the appliance.
The appliance has not been plugged in properly. Insert the plug into the socket.
For safety reasons, the dishwasher will not restart automatically when power returns.
Open dishwasher door, press START/Pause button and close the door within 4 seconds.
Power outage.
The dishwasher door is not closed.
NaturalDry pin is not pulled in.
The dishwasher won’t
start or does not re-
spond to commands.
Vigorously push the door until you hear the “click”.
A cycle is interrupted by door opening for more
than 4 seconds.
Press START/Pause and close the door within 4 seconds.
Switch off the appliance by pressing the ON-OFF/Reset button, switch it back on after approxi-
mately one minute and restart the program. If the problem persists, unplug the appliance for 1
minute, then plug it back in.
The control panel does not respond or F6 E1 is
displayed.
The filter is clogged with food residues or
limescale
Clean the filter and descale the appliance (see CLEANING THE FILTER ASSEMBLY and DESCALE
The dishwasher won’t
drain.
Display shows:
F7 E3 or F9 E1
INSTRUCTION).
The drain hose is kinked.
Check the drain hose (see INSTALLATION INSTRUCTION).
Clean the sink drain pipe.
The sink drain pipe is blocked.
Dishes are rattling against each other.
Position the crockery correctly (see LOADING THE RACKS).
The detergent has not been measured out correctly or it is not suitable for use in dishwa-
shers (see FILLING THE DETERGENT DISPENSER). Restart the current cycle by switching OFF the
dishwasher, then switch it on again, select a new program, press START/Pause and close the
door within 4 seconds. Please do not add any detergent.
An excessive amount of foam is present.
The dishwasher ma-
kes excessive noise.
Crockery has not been arranged properly.
Arrange the crockery correctly (see LOADING THE RACKS).
The filter is clogged with food residues or limescale. Clean the filter assembly (see CARE AND MAINTENANCE).
Crockery has not been arranged properly. Arrange the crockery correctly (see LOADING THE RACKS).
Spray arms cannot rotate freely, being hindered Arrange the crockery correctly (see LOADING THE RACKS). Check that the upper rack is in the
by the dishes.
correct position and adjust (lift up) if necessary.
The wash cycle is too gentle.
Select an appropriate wash cycle (see PROGRAMS TABLE).
The dishes are not
clean.
The detergent has not been measured out correctly or it is not suitable for use in dishwashers
(see FILLING THE DETERGENT DISPENSER).
An excessive amount of foam is present.
The cap on the rinse aid compartment has not
been closed correctly.
Make sure the cap of the rinse aid dispenser is closed.
The filter is clogged with food residues or limescale. Clean the filter and descale the appliance (see CLEANING THE FILTER ASSEMBLY).
The salt reservoir is empty. Fill the salt reservoir (see FILLING THE SALT RESERVOIR).
No water in the water supply or the tap is closed. Make sure there is water in the water supply and the water tap is open.
The dishwasher does
not fill the water.
Check the inlet hose (see INSTALLATION). Open dishwasher door, press START/Pause button
and close the door within 4 seconds.
The water inlet hose is kinked.
The display shows:
H O and is lit; aco-
2
The screen in the water inlet hose is clogged; it is Check and clean the screen in the water inlet hose. Open dishwasher door, press START/Pause
ustic alarm sounds.
necessary to clean it.
button and close the door within 4 seconds.
5
| General | Details |
|---|---|
| Name | Whirlpool Thron Dishwasher |
| Make | Whirlpool |
| Language | English |
| Filetype | PDF (Download) |
| File size | 23.35 MB |

Whirlpool 2B19 Dishwasher

Whirlpool WFO3O33PLAUS Standard Dishwasher

Whirlpool W11323304G Dishwasher

Whirlpool WH7IPC15BM60 Dishwasher

Whirlpool FINPUTSAD Dishwasher

Whirlpool W7U HS31 X Dishwasher

Whirlpool WDF332PAMS 24 Front Tall Tub Dishwasher

Whirlpool WRF540CWHZ Dishwasher

Whirlpool WDF130PAHB Dishwasher

Whirlpool W11049299A Dishwasher





































