Whirlpool W2I HD526 Dishwasher

1

2

3

4

Quick Guide  

EN  

THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.  

In order to receive a more complete assistance, please register  

your appliance on: www.whirlpool.eu/register  

PLEASE SCAN THE QR CODE ON YOUR  

APPLIANCE IN ORDER TO HAVE MORE  

DETAILED INFORMATION  

Before using the appliance carefully read Safety Instructions  

guide.  

CONTROL PANEL  

1. ON-OFF/Reset button with indicator light 7. Display  

2. Program selection button  

3. Salt refill indicator light  

4. Rinse Aid refill indicator light  

8. Half Load indicator lights  

9. Half Load button  

10. Delay button  

5. Program number and delay time indicator 11. START/Pause button with indicator light /  

6. Tablet indicator light  

Tablet (Tab)  

1

2

3

4

5

6 7  

8

9

10  

11  

FIRST TIME USE  

FILLING THE SALT RESERVOIR  

FILLING THE DETERGENT DISPENSER  

The use of salt prevents the formation of LIMESCALE on the dishes and on  

the machine’s functional components.  

It is mandatory that the salt reservoir never be empty.  

It is important to set the water hardness.  

The salt reservoir is located in the lower part of the dishwasher and must be  

filled when the SALT REFILL indicator light in the control panel is lit.  

To open the detergent dispenser use the opening device C. Introduce the  

detergent into the dry dispenser D only. Place the amount of detergent for  

pre-washing directly inside the tub.  

If all-in-one detergents are used, we recommend using the TABLET button,  

because it adjusts the program so that the best washing and drying results  

are always achieved.  

•

•

1. Remove the lower rack and unscrew the reservoir cap  

(anticlockwise).  

2. Position the funnel (see figure) and fill the salt reservoir  

right up to its edge (approximately 1 kg); it is not unu-  

sual for a little water to leak out.  

Usage of detergent not designed for dishwashers may cause  

malfunction or damage to the appliance.  

WATER SOFTENING SYSTEM  

Water softener automatically reduces water hardness, consequently pre-  

venting scale buildup on heater, contributing also to better cleaning effi-  

ciency. This system regenerates itself with salt, therefore it is required  

to refill salt container when empty.  

3. Only the first time you do this: fill the salt reservoir  

with water.  

4. Remove the funnel and wipe any salt residue away from the opening.  

Make sure the cap is screwed on tightly, so that no detergent can get into  

the container during the wash program (this could damage the water  

softener beyond repair).  

Whenever you need to add salt, it is mandatory to complete the proce-  

dure before the beginning of the washing cycle to avoid corrosion.  

Frequency of regeneration depends on water hardness level setting - regen-  

eration takes place once per 6 Eco cycles with water hardness level set to 3.  

Regeneration process starts in final rinse and finishes in drying phase, be-  

fore cycle ends.  

•

•

•

Single regeneration consumes: ~3.5L of water;  

Takes up to 5 additional minutes for the cycle;  

Consumes below 0.005kWh of energy.  

FILLING THE RINSE AID DISPENSER  

Rinse aid makes dish DRYING easier. The rinse aid  

dispenser A should be filled when the RINSE AID  

REFILL indicator light in the control panel is lit.  

D

C

NEVER pour the rinse aid directly into the  

appliance tub.  

A

PROGRAMS TABLE  

Duration  

Water  

Energy  

Available  

options ^*)  

of wash  

program  

(h:min)^**)  

Program  

Programs description  

consumption consumption  

(litres/cycle) (kWh/cycle)  

Eco 50°- Eco program is suitable to clean normally soiled  

tableware. that for this use. it is the most efficient program in  

terms of its combined energy and water consumption. and that  

it is used to assess compliance with the EU Ecodesign legislation.  

1.  

2.  

3.  

3:35  

2:40  

9.5  

18.0  

0.95  

1.60  

Intensive65°-Programrecommendedforheavilysoiledcrockery.especially  

suitable for pans and saucepans (not to be used for delicate items).  

6^th Sense® 55° - For normally soiled dishes with dried food residues.  

Senses the level of soiling on the dishes and adjusts the program  

accordingly. When the sensor is detecting the soil level an  

animation appears in the display and the cycle duration is updated.  

2:10-2:20  

15.5-16.5  

1.30-1.50  

Fast Wash&Dry 50° - Normally soiled crockery. Everyday cycle, that  

ensures optimal cleaning and drying performance in shorter time.  

4.  

5.  

1:30  

0:28  

11.5  

9.0  

1.30  

0.50  

Rapid 28’ 50° - Program to be used for half load of lightly-soiled  

dishes with no dried food residues. Does not have drying phase.  

-

Silent 50° - Suitable for night-time operation of the appliance.  

Ensures optimal cleaning and drying performance with the lowest  

noise emission.  

6.  

3:35  

16.6  

1.30  

Sanitizing 65° -Normallyorheavilysoiledcrockery,withadditional  

antibacterial wash. Can be used to perform maintenance of  

the dishwasher.  

7.  

8.  

9.  

2:00  

0:12  

0:50  

12.0  

4.7  

1.50  

0.01  

0.80  

Pre-Wash - Use to refresh crockery planned to be washed later. No  

detergent to be used with this program.  

-

-

Self-Clean 65° - Program to be used to perform maintenance of the  

dishwasher, to be carried out only when the dishwasher is EMPTY  

using specific detergents designed for dishwasher maintenance.  

10.0  

1

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Whirlpool W2I HD526 Dishwasher
Make	Whirlpool
Language	English
Filetype	PDF (Download)
File size	1.53 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Whirlpool

Whirlpool W2I HD526 Dishwasher Overview

Summary of Contents

• Page 1: Quick Guide Thank you for buying a Whirlpool product. In order to receive more complete assistance, please register your appliance. Please scan the QR code on your appliance for more detailed information. Before using the appliance, carefully read the safety instructions guide. Control panel includes various buttons and indicator lights for operation. Filling the salt reservoir is essential to prevent limescale formation. It is important to set the water hardness for optimal performance. Rinse aid makes dish drying easier and should be filled when the indicator light is lit. The programs table outlines different wash programs and their specifications. Eco program is suitable for normally soiled tableware and is the most efficient in terms of energy and water consumption.
• Page 2: ECO program data is measured under laboratory conditions according to European Standard EN 60436:2020. Pre-treatment of the dishes is not needed before any of the programs. Not all options can be used simultaneously. Values given for programs other than the program Eco are indicative only. The start of the program may be delayed for a period of time between 1 and 12 hours. If there are not many dishes to be washed, a half loading may be used in order to save water, electricity and detergent. The cutlery basket should be positioned only at the front of the lower rack. Large plates and lids should ideally be placed at the sides to avoid interferences with the spray arm. In case your dishwasher doesn’t work properly, check if the problem can be solved by going through the following list. Policies, standard documentation, ordering of spare parts and additional product information can be found by using the QR code on your product.
• Page 3: Page 3
• Page 4: Page 4