Whirlpool WDF560SAF Undercounter Dishwasher

1

2

Undercounter Dishwasher  

PRODUCT MODEL฀NUMBERS  

PRODUCT DIMENSIONS  

WDF560SAF  

WDF760SAD  

WDT920SAD  

WDT780SAE  

WDL785SSA  

WDT780SAD  

WDF770SAF  

23  

(60.6 cm)  

"

Electrical Requirements:฀ 120-volt, 60 Hz, AC-only,  

15-฀ or฀ 20-amp. fused electrical supply. Copper wire  

only. A฀time delay fuse or circuit breaker and separate  

circuit is฀recommended.  

"

24  

(62.2 cm)  

B

If direct wiring dishwasher: Use flexible, armored or฀  

nonmetallic, sheathed copper  

wire with grounding wire that  

C

meets the wiring requirements for  

your home and local codes and ordinances.  

Use a UL Listed or CSA Approved conduit connector.  

If connecting dishwasher with a power supply cord:  

Use power supply cord kit (Part  

Number 4317824) marked for use  

with dishwashers. Follow the kit  

instructions for installing the power supply cord.  

"

(1.9 cm)  

A

30"  

(76.2 cm)  

Power supply cord must plug into a grounded฀  

3฀prong outlet located in the cabinet next to฀the฀  

dishwasher opening. Outlet must meet all local฀  

codes and ordinances.  

"

33  

(85,1wcimth)  

Water Supply Requirements:฀A hot water line with  

20 to฀120 psi (138 to 862 kPa) water pressure. Water฀  

temperature must be 120°F (49°C) water at dishwasher.  

Use " O.D. copper tubing with compression fitting or฀  

flexible braided water supply line.  

min.  

wheels  

ed  

v

remo  

Note:฀ " minimum plastic tubing is not recommended.  

Use a 90°฀elbow with " hose connection with rubber฀  

washer (Part Number W10273460). Do not solder  

within 6"฀(15.2 cm) from water inlet valve.  

"

21  

Drain Requirements:A new drain hose is supplied with  

your dishwasher. If this is not long enough, use a new  

drain฀hose with a maximum length of 12' (3.7 m) (Part  

Number฀3385556) that meets all current AHAM/IAPMO  

test฀standards, is resistant to heat and detergent, and  

fits the 1"฀(2.5 cm) drain connector of the dishwasher.  

(53.3 cm)  

3

" - 4 "  

"

(8.8 cm - 10.6 cm)  

For 4" (10 cm)  

toekick, height of  

cabinet฀opening is  

34¹/₂" (86.3 cm).  

(9.4 cm)  

Make sure to connect the drain hose to waste tee or฀  

disposer inlet above drain trap in house plumbing and 20"฀  

(50.8 cm) minimum above the floor. It is recommended  

that the drain hose either  

air gap  

A. Insulation may be compressed  

(not used on all models).  

be฀looped up and securely฀  

fastened to the underside  

of฀the counter,or be  

B. For panel-ready models, dishwasher  

depth is 24" (60 cm) not including the  

" (1.9 cm) custom door panel.  

connected฀to an air gap.  

Make sure to use an air  

gap฀if the drain hose is฀  

connected to house฀  

plumbing lower than  

20"฀(50.8 cm) above  

subfloor or฀floor.  

C. Door handles may protrude forward  

of the face of the dishwasher; varies  

by model.  

Use฀¹/₂฀" (1.3 cm) minimum I.D. drain line fittings.  

If required, the air gap should be installed in accordance  

with the air gap installation instructions. When connecting฀  

the air gap, a rubber hose (not provided) will be needed  

to฀connect to the waste tee or disposer inlet.  

Page 1 of 2  

Dimensions are for planning purposes only. For complete details, see Installation฀  

Instructions packed with product. Specifications subject to change without notice.  

Because Whirlpool Corporation policy includes a continuous commitment to improve฀  

our products, we reserve the right to change materials and specifications without notice.  

W10741197A-D-WH  

8/30/16  

https://manual-hub.com/  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	Whirlpool WDF560SAF Undercounter Dishwasher
Make	Whirlpool
Language	English
Filetype	PDF (Download)
File size	0.27 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Whirlpool

Whirlpool WDF560SAF Undercounter Dishwasher Overview

Summary of Contents

• Page 1: Undercounter dishwasher product model numbers include WDF560SAF, WDF760SAD, WDT920SAD, WDT780SAE, WDL785SSA, WDT780SAD, and WDF770SAF. Electrical requirements specify a 120-volt, 60 Hz, AC-only supply with a 15- or 20-amp fused electrical supply. For direct wiring, use flexible, armored, or nonmetallic sheathed copper wire that meets local codes. If using a power supply cord, a specific kit marked for dishwashers is required. The power supply cord must plug into a grounded 3-prong outlet located next to the dishwasher opening. Water supply requirements include a hot water line with 20 to 120 psi water pressure and a temperature of 120°F. A new drain hose is supplied, and if longer, a new hose must meet current standards and fit the dishwasher's drain connector. The drain hose should be connected above the drain trap in house plumbing and at least 20 inches above the floor. For panel-ready models, the dishwasher depth is 24 inches, excluding the custom door panel. Dimensions provided are for planning purposes only, and specifications are subject to change without notice.
• Page 2: Cabinet cutout dimensions are provided for installation. Shaded areas indicate where utility connections may be installed. Measure from the lowest point on the underside of the countertop. Minimum width is 24 inches (61 cm). Check that all surfaces have no protrusions that would prohibit dishwasher installation. Dimensions are for planning purposes only. Specifications are subject to change without notice. For complete details, see installation instructions packed with the product. Whirlpool Corporation reserves the right to change materials and specifications without notice.