Home > ZLINE Kitchen > ZLINE Kitchen DWV Tallac Dishwasher
ZLINE Kitchen DWV Tallac Dishwasher
INSTALLATION
8. Depending on the weight of the assembled outer panel, the door spring tension can be
adjusted by the mechanism shown in Figure F.
• If the door is falling down, the mechanism must be turned clockwise in the direction
of the white arrow with a Phillips screwdriver.
• If the door is swinging upwards, the mechanism must be turned counter-clockwise
in the direction of the black arrow with a Phillips screwdriver.
Minimum Phillips screwdriver diameter is 15/64" (6 mm) for this application.
NOTICE
9. After adjusting the door tension, the holes can be covered with the four provided adhesive
hole covers (f).
10.Mounting brackets previously fixed to the dishwasher are also fixed in the cabinetry with
Screws Ø 5/32" x 19/32" (h).
11 . Check whether the bottom of the door hits the toe kick of the kitchen cabinet.
• If the door hits the toe kick, cut the necessary section out of the toe kick.
• Apply silicone, sealant, or paint to the cut edge of the kitchen cabinet toe kick so
it does not absorb moisture.
Scan the QR code for a door spring tension tutorial.
25
| General | Details |
|---|---|
| Name | ZLINE Kitchen DWV Tallac Dishwasher |
| Make | ZLINE Kitchen |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.62 MB |
(1 votes, average: 5.00 out of 5)
Loading...
ZLINE Kitchen DW7713 Classic Dishwasher
ZLINE Kitchen DWMT Monument Dishwasher
JENNAIR JDAF5924RX Flush Mount Panel Ready Dishwasher
BOSCH SMS4HTW00E Dishwasher
BOSCH SMS6ZCI42E Free-Standing Dishwasher
TEKNIX TBD606 Dishwasher
FISHER PAYKEL DD24SCTW9 N Single DishDrawer Dishwasher
BOSCH SMS4HVI03E Dishwasher
MONOGRAM CDT845P4NW2 Interior Dishwasher
BOSCH SMS8ZDW86M Dishwasher
KUCHT K6502D Dishwasher
element ENB6631PEBB 18 Inch Dishwasher