Home > ZLINE Kitchen > ZLINE Kitchen DWV Tallac Dishwasher
ZLINE Kitchen DWV Tallac Dishwasher
INSTALLATION
INSTALLING THE OUTER PANEL
After the dishwasher is properly connected to water and electrical and is installed into your
cabinet cutout, the final step is to secure the outer panel onto the dishwasher door.
1. If necessary for a custom outer panel, affix the panel mounting template provided with
the appliance to the inside of the outer panel, making sure the template is straight so the
drill holes line up.
After drilling holes as noted on the mounting template, remove the template
before completing installation onto the dishwasher door.
NOTICE
2. As shown in Figure A, drill each screw hole into the inside of the outer panel using the
points marked on the template, making sure not to drill deeper than 15/32" (12 mm).
• Diameter of Drilling Bit: 5/64" (2 mm)
• Depth of Drilling Bit: 15/32" (12 mm)
NOTE: The use of the outer panel mounting template only applies to custom door panels
supplied by the customer. ZLINE-provided outer panels are pre-drilled and therefore do not
require the template to install.
22
| General | Details |
|---|---|
| Name | ZLINE Kitchen DWV Tallac Dishwasher |
| Make | ZLINE Kitchen |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.62 MB |
(1 votes, average: 5.00 out of 5)
Loading...
ZLINE Kitchen DWMT Monument Dishwasher
ZLINE Kitchen DW7713 Classic Dishwasher
FISHER AND PAYKEL DD60DTX6HI1-CN Tall Dishwasher
Blomberg LDV42320 Dishwasher
MAYTAG W11363089B Dishwasher
FISHER PAYKEL DW60FC2X2 Dishwasher
ARTUSI ADW5008X Dishwasher
BOSCH SMV4HTX27G Dishwasher
Whirlpool Dishwashers Safety
FISHER PAYKEL DD24STX6PX1 Tall Sanitize Dishwasher
SIEMENS SX93HX60CG Dishwasher
BOSCH SMU2HVW20S Dishwasher