Home > ZLINE Kitchen > ZLINE Kitchen DWV Tallac Dishwasher
ZLINE Kitchen DWV Tallac Dishwasher
INSTALLATION
ADJUSTING HEIGHT
1. Before the dishwasher is placed into the cabinetry, the two front legs will be completely
retracted. Adjust the legs by turning in the direction of the black arrows (noted below) with a
flathead screwdriver to allow for the unit to move downwards.
2. For the back leg, using a Phillips screwdriver, turn the height adjustment screw in the middle of
the lower front panel as shown in the image. Turning counter-clockwise (in the direction of the
black arrow) will lower the rear dishwasher leg, and turning clockwise will raise the rear leg.
3. Once the front two legs and rear leg are lowered, move the dishwasher into the cabinetry
and adjust the legs as necessary to balance and raise the dishwasher to the enclosure height.
4. Make sure the dishwasher is plumb with the countertop above.
• NOTE: When engaging the rear leg adjustment screw, if it doesn't move, hold and pull the
leg with your free hand (or use a helper) to loosen the leg before installing.
DWV-18 MODEL
If height of the enclosure is 32 1/8" (816 mm) to 34 1/8" (867 mm), use the short leg supports
as shown in the figure above.
If the height is above 34 1/8" (867 mm), use the long leg supports as shown in the figure above.
12
| General | Details |
|---|---|
| Name | ZLINE Kitchen DWV Tallac Dishwasher |
| Make | ZLINE Kitchen |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.62 MB |
(1 votes, average: 5.00 out of 5)
Loading...
ZLINE Kitchen DW7713 Classic Dishwasher
ZLINE Kitchen DWMT Monument Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
THPRIMO 45DFULLSLID Vaatwasser Dishwasher
BOSCH SMS4HMI06E Dishwasher
FISHER and PAYKEL Built Under Dishwasher
BOSCH 9001164801 Dishwasher
kogan KABNCHTPDWA Benchtop Dishwasher
HEINNER HDW-BIM60514E Dishwasher
BOSCH SMD6EDX57G Dishwasher
FISHER AND PAYKEL DD60DHI9 Integrated Dishwasher
BOSCH SMH8ZCX10R Dishwasher