Adexa WST5A6WTWL Commercial Mini Dishwasher
End of program
Six beeps will indicate that the wash cycle has finished and then the dishwasher will be turned off.
Several minutes after the program has ended:
⚫
⚫
⚫
Open the door .
Turn the water tap off.
Remove dishes, etc. when they have cooled down.
Interrupt the program
⚫
Open the door. Caution! There is a risk of water squirting out from inside the appliance. Do not open the door fully
until spray arm has stopped rotating.
⚫
⚫
Open the door, Please press the “Start/Pause” button first !
If the appliance has already heated up or the hot water was switched ON and then the appliance door opened, leave
the door ajar for several minutes and then close. Otherwise, the appliance door may open due to expansion.
Cancelling or modifying a cycle
⚫
To modify a cycle that is already underway, press the “Power” button , all of the settings will be cancelled. To set a
new cycle, and then press the “Power” button again to switch on the dishwasher, press “Program” to choose new
wash mode. During modifying the cycle, if the detergent has already been used, and the appliance may have already
drained the wash water. If this is the case, the detergent must be refilled.
⚫
To cancel one running cycle, press the “Power”button is ok.
How to keep your dishwasher in shape
⚫
After Every Wash
After every wash, turn off the water supply the appliance and leave the door slightly ajar so that moistureand odors are not
trapped inside.
⚫
Remove the plug
Before cleaning or performing maintenance, always remove the plug from the socket. Do not run risks.
No solvents or abrasive cleaning products
⚫
To clean the exterior and rubber parts of the dishwasher, do not use solvents or abrasive cleaning products. Rather, use
only a cloth and warm soapy water.
To remove spots or stains from the surface of the interior, use a cloth dampened with water and a little while vinegar, or
cleaning product made specifically for dishwashers.
⚫
Moving the Appliance
If the appliance must be moved, try to keep it in a vertical position. If absolutely necessary, it can bepositioned on its
back.
⚫
Seals
One of the factors that cause odors to form in the dishwasher is food that remains trapped in the seals.Periodic cleaning
with a damp sponge will prevent this from occurring.
The door should not be left in the open position since this could present a tripping hazard.
⚫
When you go on holiday
When you go on holiday, it is recommended that you run a wash cycle with the dishwasher empty and then remove the
plug from the socket, turn off the water supply and leave the door of the appliances lightly ajar. This will help the seals last
longer and prevent odors from forming within the appliance.
Care and maintenance
Regular inspection and maintenance of your appliance helps to prevent problems from occurring. This saves time and
aggravation.You should therefore carefully inspect the inside of your dishwasher from time to time.
Overall condition of appliance
Check that no grease or scale has accumulated on the inside of the dishwasher.
If you discover any deposits: Clean the interior of the dishwasher thorughly with a detergent solution.
Filter
The filter 6 and 7 can prevent larger particles of food in the water from reaching the pump. These particles may
occasionally block the filters.
⚫
⚫
When the appliance has finished washing, check the filters for particles of food and, if required, clean.
After undoing the coarse micro-filter 7, the filter unit 6 can be removed. Remove any particles of food and rinse the
filters under running water.
⚫
Insert the filter unit 6 and tighten the coarse microfilter 7.
| General | Details |
|---|---|
| Name | Adexa WST5A6WTWL Commercial Mini Dishwasher |
| Make | Adexa |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.27 MB |






























