Home > AEG > AEG FFB64607ZM 6000 SatelliteClean Dishwasher

AEG FFB64607ZM 6000 SatelliteClean Dishwasher

ENGLISH  
21  
Problem and alarm code  
Possible cause and solution  
You cannot activate the ap‐  
pliance.  
Make sure that the mains plug is connected to the mains  
socket.  
Make sure that there is no damaged fuse in the fuse  
box.  
The programme does not  
start.  
Make sure that the appliance door is closed.  
Press the start button.  
If the delay start is set, cancel the setting or wait for the  
end of the countdown.  
The appliance recharges the resin inside the water soft‐  
ener. The duration of the procedure is approximately 5  
minutes.  
The appliance does not fill  
with water.  
The display shows i10 or  
i11.  
Make sure that the water tap is open.  
Make sure that the pressure of the water supply is not  
too low. For this information, contact your local water  
authority.  
Make sure that the water tap is not clogged.  
Make sure that the filter in the inlet hose is not clogged.  
Make sure that the inlet hose has no kinks or bends.  
The appliance does not  
drain the water.  
The display shows i20.  
Make sure that the sink spigot is not clogged.  
Make sure that the interior filter system is not clogged.  
Make sure that the drain hose has no kinks or bends.  
The anti-flood device is on.  
The display shows i30.  
Close the water tap.  
Make sure that the appliance is correctly installed.  
Make sure the baskets are loaded as instructed in the  
user manual.  
Malfunction of the water lev‐  
el detection sensor.  
The display shows i41 - i44.  
Make sure that the filters are clean.  
Switch the appliance off and on.  
Malfunction of the wash  
pump or the drain pump.  
The display shows i51 - i59  
or i5A - i5F.  
Switch the appliance off and on.  
The temperature of the wa‐  
ter inside the appliance is  
too high or malfunction of  
the temperature sensor oc‐  
curred.  
Make sure that the temperature of the inlet water does  
not exceed 60°C.  
Switch the appliance off and on.  
The display shows i61 or  
i69.  
Technical malfunction of the  
appliance.  
Switch the appliance off and on.  
The display shows iC0 or  
iC3.  
GeneralDetails
NameAEG FFB64607ZM 6000 SatelliteClean Dishwasher
MakeAEG
LanguageEnglish
FiletypePDF (Download)
File size0.83 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
AEG FFE83800PM Dishwasher

AEG FFB64607ZM 6000 SatelliteClean Dishwasher