AEG FFE83800PM Built-Under Dishwasher
10
To enter user mode, press and hold
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid
simultaneously
and
until the
and flash
indicators
,
,
,
and the display is blank.
dispenser and no rinse aid is released.
Factory setting: level 4.
6.2 The rinse aid empty
notification
How to set the rinse aid level
The rinse aid helps to dry the dishes
without streaks and stains.
Make sure the appliance is in user mode.
1. Press
.
The rinse aid is automatically released
during the hot rinse phase.
•
The indicators
go off.
,
,
and
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
to refill rinse aid. If the drying results are
satisfactory while using multi-tablets
only, it is possible to deactivate the
notification for refilling rinse aid.
However, for best drying performance,
always use rinse aid.
•
•
The indicator
The display shows the current
still flashes.
setting: e.g. = level 4.
–
The levels of rinse aid are
from 0A to 6A
where level 0A means rinse
aid is not used.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
2. Press
setting.
3. Press the on/off button to confirm
repeatedly to change the
the setting.
How to deactivate the rinse
aid empty notification
6.4 Acoustic signals
Acoustic signals sound when a
malfunction of the appliance occurs. It is
not possible to deactivate these acoustic
signals.
Make sure the appliance is in user mode.
1. Press
.
•
The indicators
go off.
,
,
and
There is also an acoustic signal that
sounds when the programme is
completed. By default this acoustic
signal is deactivated but it is possible to
activate it.
•
•
The indicator
The display shows the current
still flashes.
setting: = the rinse aid empty
notification is activated (factory
setting).
How to activate the acoustic
signal for the end of
programme
2. Press
= the rinse aid empty notification is
deactivated.
to change the setting.
Make sure the appliance is in user mode.
3. Press the on/off button to confirm
the setting.
1. Press
.
•
The indicators
go off.
,
,
and
6.3 The rinse aid dispenser
The rinse aid helps to dry the dishes
without streaks and stains.
•
•
The indicator
still flashes.
The display shows the current
setting: = Acoustic signal off.
2. Press to change the setting.
= Acoustic signal on.
The rinse aid is automatically released
during the hot rinse phase.
| General | Details |
|---|---|
| Name | AEG FFE83800PM Built-Under Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.97 MB |
(1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
BOSH SX73HX42VE Dishwasher
FISHER PAYKEL DD24SV2T9 Single Dishwasher
FISHER PAYKEL DW24U2I1 Drop Down Dishwasher
SIEMENS SX63HX60AE Fully Integrated Dishwasher
BOSCH SMS2HVI66G Dishwasher
Mueller DW-2400 Dishwasher
InDeSIT IN2FE10CS90S Dishwasher
LG Electronics MFL30149780 Dishwasher
BOSCH SMV26DX00T Dishwasher
Miele PFD 103 SCi XXL XXL Dishwasher