AEG FSB64907Z Dishwasher
ENGLISH
23
element (B) counterclockwise and
pull the spray arm downwards.
4. Wash the spray arm under running
water. Use a thin pointed tool, e.g. a
toothpick, to remove particles of soil
from the holes. Run the water
5. To install the spray arm (C) back,
insert the mounting element (B) in
the spray arm and fix it in the delivery
tube (A) by turning it clockwise. Make
sure that the mounting element locks
into place.
through the holes to wash soil
6. Install the cutlery drawer on the
sliding rails and block the stoppers.
particles away from the inside.
12. TROUBLESHOOTING
to contact an Authorised Service
Centre.
WARNING!
Improper repair of the
appliance may pose a
danger to the safety of the
user. Any repairs must be
performed by qualified
personnel.
Refer to the below table for information
on possible problems.
With some problems, the display shows
an alarm code.
The majority of problems that may
occur can be solved without the need
Problem and alarm code
Possible cause and solution
You cannot activate the ap‐
pliance.
•
•
Make sure that the mains plug is connected to the mains
socket.
Make sure that there is no damaged fuse in the fuse
box.
The programme does not
start.
•
•
Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or wait for the
end of the countdown.
The appliance recharges the resin inside the water soft‐
ener. The duration of the procedure is approximately 5
minutes.
•
| General | Details |
|---|---|
| Name | AEG FSB64907Z Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.96 MB |

AEG FSK76748P Dishwasher

AEG FSK53617Za Dishwasher

AEG FSK74747P Dishwasher

AEG FSE73507P Dishwasher

AEG GS60AIM Dishwasher

AEG FSB73427Z Dishwasher

AEG FSE74737P Quickselect Dishwasher

AEG FFB73727PM Dishwasher

AEG F8642FI Tall Tub Dishwasher

AEG FFE83800PM Dishwasher













































