AEG FSB64907Z Dishwasher
ENGLISH
25
Problem and alarm code
Possible cause and solution
The displayed programme
duration is different than the
duration in the consumption
values table.
•
Refer to the consumption values table in the chapter
"Programme selection".
The remaining time in the
display increases and skips
nearly to the end of the pro‐
gramme duration.
•
This is not a defect. The appliance is working correctly.
Small leak from the appli‐
ance door.
•
•
The appliance is not levelled. Loosen or tighten the ad‐
justable feet (if applicable).
The appliance door is not centred on the tub. Adjust the
rear foot (if applicable).
The appliance door is diffi‐
cult to close.
•
The appliance is not levelled. Loosen or tighten the ad‐
justable feet (if applicable).
•
•
Parts of the tableware are protruding from the baskets.
The appliance door opens
during the wash cycle.
The AirDry function is activated. You can deactivate the
function. Refer to "Basic settings".
Rattling or knocking sounds
from the inside of the appli‐
ance.
•
The tableware is not properly arranged in the baskets.
Refer to basket loading leaflet.
•
•
Make sure that the spray arms can rotate freely.
The appliance trips the cir‐
cuit-beaker.
The amperage is insufficient to supply simultaneously all
the appliances in use. Check the socket amperage and
the capacity of the meter or turn off one of the applian‐
ces in use.
Internal electrical fault of the appliance. Contact an Au‐
thorised Service Centre.
•
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
12.1 The product number
code (PNC)
If you contact an Authorised Service
Centre, you need to provide the product
number code of your appliance.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
The PNC can be found on the rating
plate on the appliance door. You can
also check the PNC on the control panel.
WARNING!
We do not recommend using
the appliance until the
problem has been
Before checking the PNC, make sure the
appliance is in the programme selection.
completely fixed. Unplug the
appliance and do not plug it
in again until you are certain
that it operates correctly.
1. Press and hold simultaneously
and
for about 3 seconds.
The display shows the PNC of your
appliance.
2. To exit the PNC presentation, press
and hold simultaneously
for about 3 seconds.
and
| General | Details |
|---|---|
| Name | AEG FSB64907Z Dishwasher |
| Make | AEG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.96 MB |
(1 votes, average: 5.00 out of 5)
Loading...
AEG FSK76748P Dishwasher
AEG FSK53617Za Dishwasher
AEG FSK74747P Dishwasher
AEG FSE73507P Dishwasher
AEG GS60AIM Dishwasher
AEG FSB73427Z Dishwasher
AEG FSE74737P Quickselect Dishwasher
AEG FFB73727PM Dishwasher
AEG F8642FI Tall Tub Dishwasher
AEG FFE83800PM Dishwasher
Whirlpool W7U HS31 X Dishwasher
SAMSUNG DW80N3030UW Front Dishwasher
FISHER PAYKEL DD60DDFHB9 Double Dishwasher
BOSCH SMS2HTI02E Dishwasher
Whirlpool 859991663300 Dishwasher
BOSH SMD8YCX03G Dishwasher
ARDESTO DWMF-V608SMHDS Dishwasher
BOSCH SPV2HKX1DR Dishwasher
HJC V31 Carbon 22 Inch Countertop Portable Dishwasher
FISHER PAYKEL DD60D2NB9 Dishwasher