Home > ARTUSI > ARTUSI ADWFI700 Dishwasher

ARTUSI ADWFI700 Dishwasher

4.4. Using combined detergents  
These products should be used according  
to the manufacturer’s instructions.  
4. BEFORE USING  
THE APPLIANCE  
4.1. Preparing your  
Dishwasher for first use  
Never put combined detergents into the  
interior section or the cutlery basket.  
Make sure the electricity and supply  
water specifications match the values  
indicated in the installation instructions  
for the machine.  
Combined detergents contain not only  
the detergent but also rinse-aid, salt  
replacement substances and additional  
components depending on the combination.  
We recommend you do not use combined  
detergents in short programmes.  
Please use powder detergents in such  
programmes.  
Remove all packaging material inside  
the machine.  
Fill the rinse aid compartment.  
If you encounter problems when using  
combined detergents, please contact the  
detergent manufacturer.  
When you stop using combined detergents,  
make sure that water hardness and rinse  
aid settings are set to the correct level.  
4.2. Detergent usage  
Only use detergents specifically designed  
for domestic dishwashers. Keep your  
detergents in cool, dry places out of reach  
of children.  
Add the proper detergent for the selected  
program to ensure the best performance.  
The amount of detergent needed depends  
on the cycle, load size, and soil level of  
dishes.  
Do not fill detergent into the detergent  
compartment more than required; otherwise  
you can see whitish streaks or bluish layers  
on glass and dishes and may cause glass  
corrosion. Continued use of too much  
detergent may cause machine damage.  
Using little detergent can result in  
poor cleaning and you can see whitish  
streaksin hard water. See the detergent  
manufacturer’s instructions for a further  
information.  
4.5. Rinse-aid usage  
The rinse aid helps to dry the dishes without  
streaks and stains. Rinse-aid is required for  
stain-free utensils and clear glasses. The  
rinse aid is automatically released during  
the hot rinse phase. If rinse aid dosage  
setting set too low, whitish stains remains  
on dishes and dishes do not dry and  
washed clean. If rinse aid dosage setting  
set too height, you can see bluish layers on  
glass and dishes.  
4.6. Filling the rinse-aid and setting  
To fill the rinse aid compartment, open  
the rinse-aid compartment cap. Fill the  
compartment with rinse aid to the MAX level  
and then close the cap. Be careful not to  
overfill the rinse aid compartment and wipe  
up any spills.  
4.3. Filling the detergent  
Push the latch to open the dispenser and  
pour in the detergent.  
Close the lid and press it until it locks in  
place. The dispenser should be refilled just  
before the start of each programme. If the  
dishes are heavily soiled, place additional  
detergent in the pre-wash detergent  
chamber.  
In order to change the rinse aid level,  
follow the below steps:  
Touch the programme button and hold  
it down.  
Turn on the machine.  
Hold down the Programme button  
until “rA” disappears. Rinse aid setting  
follows water hardness setting.  
DETERGENT  
The machine will display the last setting.  
Change the level by touching the  
programme button.  
EN - 10  
GeneralDetails
NameARTUSI ADWFI700 Dishwasher
MakeARTUSI
LanguageEnglish
FiletypePDF (Download)
File size1.83 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
ARTUSI ADW4001X Dishwasher
ARTUSI ADW4001X Dishwasher
ARTUSI ADW5001X Dishwasher
ARTUSI ADW5001X Dishwasher
ARTUSI ADW5008X Dishwasher
ARTUSI ADW5008X Dishwasher

ARTUSI ADWFI700 Dishwasher