AVG DW-WQP12 Dishwasher
Water Supply And Drain
Cold water connection
Connect the cold water supply hose to
a threaded 3/4(inch) connector and
make sure that it is fastened tightly in
place.
If the water pipes are new or have not
been used for an extended period of
time, let the water run to make sure
that the water is clear. This precaution
is needed to avoid the risk of the
water inlet to be blocked and damage
the appliance.
ordinary supply hose
safety supply hose
About the safety supply hose
The safety supply hose consists of the double walls. The system guarantees its
intervention by blocking the flow of water in case of the supply hose breaking and
when the air space between the supply hose itself and the outer corrugated hose is
full of water.
WARNING
A hose that attaches to a tap can burst if it is installed on the same water
line as the dishwasher. If your sink has one, it is recommended that the
hose be disconnected and the hole plugged.
How to connect the safety supply hose
1. Pull the safety supply hoses out from storage compartment located at
rear of dishwasher.
2. Tighten the screws of the safety supply hose to the faucet with thread 3/4inch.
3. Turn the water fully on before starting the dishwasher.
How to disconnect the safety supply hose
1. Turn off the water.
2. Unscrew the safety supply hose from the faucet.
18
| General | Details |
|---|---|
| Name | AVG DW-WQP12 Dishwasher |
| Make | AVG |
| Language | English |
| Filetype | PDF (Download) |
| File size | 7.79 MB |
(1 votes, average: 5.00 out of 5)
Loading...
GRUNDIG GSV 42840 Dishwasher
IKEA TORSBODA Dishwasher
BOSCH SMS4EMW01E Dishwasher
IKEA 404.755.53 Medelstor Dishwasher
BOSCH SMH8ZCX10R Dishwasher
Whirlpool DU810SWP Undercounter Dishwasher
Rubicum DRYSTACK Multistage Dishwasher
BOSCH GV642 A Dishwasher
Miele 852-01 Dishwasher
BOSCH SPI6EMS17E Dishwasher