Home > BLACK PLUS DECKER > BLACK plus DECKER BDW300MHS Dishwasher
BLACK plus DECKER BDW300MHS Dishwasher
SET UP & USE
FACTORS AFFECTING PERFORMANCE
USING RINSE AID
Rinse aid greatly improves drying and reduces water spots and filming. Without rinse
aid, your dishes and dishwasher interior will have excessive moisture. In addition, the
heated dry option will not perform as well without rinse aid. The rinse aid dispenser,
located next to the detergent cup, automatically releases a measured amount of rinse
aid during the last rinse. If spotting and poor drying is a problem, increase the amount
of rinse aid dispensed by rotating the dial to a higher number. The dial is located
under the dispenser cap.
If the rinse aid is low, the rinse aid light turns on at the beginning and end of the cycle
indicating that it is time to refill. Refer to “Filling the rinse aid dispenser” section.
WATER TEMPERATURE
Hot water is required for optimum dishwashing and drying results. Water entering the
dishwasher should be at least 120° F (49° C) to achieve satisfactory results.
To check water temperature entering dishwasher:
1. Turn on the hot water faucet near the dishwasher and let it run for several minutes.
2. Hold a thermometer (a candy or meat thermometer will work) in the water stream
to check the temperature. If temperature is below 120° F (49° C), have a qualified
person raise the hot water heater thermostat setting.
IMPORTANT!
To make sure that the water entering the dishwasher is hot, run hot water from the
nearest hot water faucet to clear cool water from the
pipe before starting the cycle.
HEAT DRY FUNCTION
The heat dry function, when used with a rinse aid, enhances drying performance.
If you do not choose the heat dry function, items in your load that will not be
completely dry at the end of the cycle.
WATER PRESSURE
For optimum performance, the hot water supply line for your dishwasher must
provide water pressure of at least 20 psi and not more than 120 psi. You may
experience low water pressure during high-demand periods, such as when laundry or
showers are in use while you are washing the dishes. To eliminate this problem, wait
until hot water demand is reduced before starting the dishwasher.
Caution: TO AVOID BURN INJURY: Allow the heating element to cool before
attempting to clean the interior of your dishwasher.
Page 22
| General | Details |
|---|---|
| Name | BLACK plus DECKER BDW300MHS Dishwasher |
| Make | BLACK PLUS DECKER |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.56 MB |
(1 votes, average: 5.00 out of 5)
Loading...
BLACK Plus DECKER BDW200M Dishwasher
BLACK PLUS DECKER BDW200MW Dishwasher
BOSCH SHE53CM2N Recessed Handle Dishwasher
maxima 09240080 Pass Through Dishwasher
beko DUT25401XHW Pocket Handle Dishwasher
CMA EST-FL1 EST Front Loader Water Dishwasher
FISHER AND PAYKEL DD60DCX9 Contemporary Dishwasher
Midea WQP12-5201C Dishwasher
FISHER AND PAYKEL DD24SHTI9 N Dish Drawer Dishwasher
TOMADO TDW5501W Tabletop Dishwasher
BOSCH SMS44DW01T Dishwasher
Fisher and Paykel DD60D2NX9 Built-Under Dishwasher