BOSCH 041203 Dishwasher
¡ Do not move or twist the gas connection elbow.
2. To access the bypass screw, use the tip of the
screwdriver to push down on the flexible rubber
holder.
Connection to gas cylinder or liquid gas tank
▶ If the flame is large or unstable, check that the
regulator of the gas cylinder or liquid gas tank is
working properly.
Note: You can install an overpressure safety device
that limits or cuts off the gas supply if the regulator
of the gas cylinder or liquid gas tank fails.
Never remove the sealing ring. Sealing rings pre-
vent liquids and dirt from finding their way into the
appliance and impairing its ability to function prop-
erly.
3. When adjusting the bypass screws (M) with a slot-
.
‒ A: Firmly tighten the bypass screws.
‒ B: Turn the bypass screws until the gas flow
from the burners is correct.
Spare parts for gas connection
If the country's regulations allow, you can obtain the
gas connection parts from the technical customer
service.
Replacing the nozzles
1. Remove all pan supports, burner caps and distrib-
Gas connection R 1/2
utors.
2. Replace the nozzles using the appropriate wrench
and tighten them carefully to guarantee the seal.
Gas connection G 1/2
Ensure that the nozzle does not become detached
during removal or fastening.
1. Replace the gas connection elbow on the appli-
ance with the gas connection elbow G 1/2 sup-
plied in the accessory bag.
Reinstalling the appliance
▶ Install the appliance components in reverse order.
2. Insert the seal between the gas connection of the
appliance and the gas supply.
Checking if equipment is working
1. Check that turning the rotary knob between the
position for maximum power and the position for
minimum power does not cause the burner to go
out or result in backfire.
Electrical connection
¡ This appliance is type Y: The connection cable
must only be replaced by technical customer ser-
vice and not by the user. The cable type and the
minimum cross section must be respected.
¡ The hobs are supplied with a power cord with or
without a plug.
2. If the gas flow from the burner is not correct:
, check whether the nozzle
and the bypass screw are correct.
‒ Tighten or loosen the bypass screw until the
gas flow from the burner is correct.
¡ The power cable must only be replaced with a
cable from the original manufacturer. This is avail-
able from after-sales service.
¡ Do not use extension cables or multiple socket
strips.
¡ Only connect appliances that are fitted with a plug
to a correctly installed socket with protective earth
conductor.
Documenting the gas type conversion
▶ Attach the sticker showing the new gas type near
to the rating plate.
¡ Connect the appliance to a fixed installation and
set up appropriate isolating switches in accord-
ance with the installation regulations.
¡ BN: Brown
¡ BU: Blue
¡ GN/YE: Green and yellow
Converting the gas type
If the country's regulations allow, this appliance can
be adapted to other types of gas, if these are listed
on the rating plate.
You can find the right parts in the bag that is sup-
plied with the appliance or you can obtain them from
shows the
right combination for the relevant burner and gas
type.
Economy burner
Standard-output burner
High-output burner
Mini-wok multi-crown burner
Adjusting the taps
1. Set the control elements to the minimum power
level and pull them out.
6
| General | Details |
|---|---|
| Name | BOSCH 041203 Dishwasher |
| Make | Bosch |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.38 MB |

BOSCH SMV6ZCX49E-39 Dishwasher

BOSCH SMI4HVS33E Dishwasher

BOSCH SRV2HKX39G Dishwasher

BOSCH SGS4HAW40G Dishwasher

BOSCH SGH4HVX32G Dishwasher

BOSCH SMS4ECI26E Dishwasher

BOSCH SPV4XMX28E Dishwasher

BOSCH SMS6EDI02G Free-Standing Dishwasher

BOSCH SMS6EDW02G Free-Standing Dishwasher

BOSCH SMV4HTX27G Dishwasher





















