BOSCH 041203 Dishwasher

1

2

3

4

5

6

7

8

8001314459ꢀ(041203)  

*8001314459*  

en Installation instructions  

1

590  

a

520  

~19-29  

~55  

~26  

b

2

1

   

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	BOSCH 041203 Dishwasher
Make	Bosch
Language	English
Filetype	PDF (Download)
File size	0.38 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Bosch

BOSCH 041203 Dishwasher Overview

Summary of Contents

• Page 1: Installation instructions
• Page 2: Page 2
• Page 3: Page 3
• Page 4: WARNING ‒ Risk of explosion! Escaping gas may cause an explosion. All installation, connection, regulating and conversion work to a different gas type must be carried out by an authorised professional while taking into account the respective applicable regulations and legal requirements. Special attention must be paid to the provisions and guidelines that are applicable for the ventilation. For conversion work to a different gas type, we recommend that you call the after-sales service. Ensure that the kitchen is sufficiently ventilated, in particular when operating the gas cooking appliance. Do not connect the appliance to an exhaust gas system for combustion products. Follow these safety instructions when installing the appliance. Read this instruction manual carefully. The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location.
• Page 5: Never install the appliance in boats or in vehicles. The warranty applies only when using the appliance as intended. The fitted unit must be heat-resistant up to 90 °C. Before installing the appliance, check that the local conditions of the supplier are compatible with the appliance settings specified on the rating plate. Secure the power cord to the cabinet to prevent it from touching hot parts of the oven or hob. Before any work is carried out on the appliance, switch off the power supply and the gas supply. The appliance must only be installed on an oven with forced ventilation. The unit in which the appliance is installed must be stable and secured appropriately. Seal the cut surfaces of wooden work surfaces with a special glue seal to protect them from moisture. A gas leakage may cause an explosion.
• Page 6: Do not move or twist the gas connection elbow. To access the bypass screw, use the tip of the screwdriver to push down on the flexible rubber holder. If the flame is large or unstable, check that the regulator of the gas cylinder or liquid gas tank is working properly. You can install an overpressure safety device that limits or cuts off the gas supply if the regulator of the gas cylinder or liquid gas tank fails. Never remove the sealing ring. Sealing rings prevent liquids and dirt from finding their way into the appliance and impairing its ability to function properly. When adjusting the bypass screws, refer to the table. Replace the nozzles using the appropriate wrench and tighten them carefully to guarantee the seal. Check that turning the rotary knob between the position for maximum power and the position for minimum power does not cause the burner to go out or result in backfire. The connection cable must only be replaced by technical customer service and not by the user. If the gas flow from the burner is not correct, check whether the nozzle and the bypass screw are correct.