BOSCH 9001164801 Dishwasher
Troubleshooting Guide
Dishwashers may occasionally exhibit problems that are unrelated to a malfunction of the dishwasher itself. The
following information may help you with a dishwasher problem without involving a repair professional.
Problem
Cause
Action
Cycle does
not resume
after door is
opened and
closed
1. Door is opened longer than 4 seconds after a 1. Press [START / RESUME] button and close the
cycle has started.
door within 4 seconds to resume cycle.
during cycle.
1. Door may not be properly latched.
2. Unit may not be turned on.
3. Unit not reset or previous cycle not com-
pleted.
4. Delay start engaged.
5. Interruption of electrical power supply to
dishwasher or blown fuse.
1. Shut the door completely.
2. Press the main power switch to turn unit on.
3. To reset, refer to “Operating the Dishwasher”
in this manual.
4. To reset, refer to “Delay Start” section in this
manual.
5. Check circuit breaker.
Dishwasher
does not
start
6. The door may have been closed without first
selecting a cycle.
7. Water supply may not be turned on.
6. Select a cycle and press Start/Resume.
7. Check and turn on water supply.
Dishwasher 1. Default factory settings alert the customer
1. To adjust the volume or deactivate, refer to
the “Cycle Completion Signal” section in this
manual.
beeping
(end of cycle
signal)
that the cycle is complete by beeping. This
feature can be deactivated if so desired.
2. Water connection is lost.
2. Check and turn on water supply.
Display does 1. A fuse may have been blown or circuit
not illumi- breaker tripped.
nate or con- 2. Door not closed or latched.
1. Check the fuse or circuit breaker box and
replace the fuse or reset the breaker if neces-
sary.
sole lights
are not on
2. Ensure door is properly latched and com-
pletely closed.
Dishwasher 1. Incoming water is not warm enough.
seems to run 2. Cycle time can vary due to soil and water
1. Before starting a cycle, run hot water faucet
at the sink closest to the dishwasher.
2. Sensors in the dishwasher automatically
increase the cycle time to ensure a good wash
when heavy soil is detected.
3. Add rinse aid.
4. Verify dishwasher is connected to hot water
supply plumbing.
a long time
conditions.
3. Rinse aid dispenser is empty.
4. Dishwasher connected to cold water supply.
Note: Refer to “Wash Cycle Information” sec-
tion in this manual for typical cycle lengths.
Dishes are
not getting
clean
1. Spray arm movement obstructed.
2. Spray arm nozzles clogged.
3. Improper use of detergents.
4. Filters could be clogged.
5. Dishes are nested or loaded too close
together.
1. Ensure that spray arm movement is not
blocked by hand rotating spray arms before
starting cycle.
2. Remove the spray arms and clean according
to the “Care and Maintenance” section of the
manual.
enough
6. Selected wash cycle is not suitable for food
soil conditions.
3. Increase or decrease detergent depending on
the water hardness (refer to Table 1).
4. Clean the filters according to the “Care and
Maintenance” section of the manual.
5. Rearrange load such that water spray can
reach all items in the dishwasher - see “Load-
ing the Dishwasher” section of the manual.
6. Refer to “Wash Cycle Information” section of
the manual.
20
| General | Details |
|---|---|
| Name | BOSCH 9001164801 Dishwasher |
| Make | Bosch |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.93 MB |

BOSCH SMV6ZCX49E-39 Dishwasher

BOSCH SMI4HVS33E Dishwasher

BOSCH SRV2HKX39G Dishwasher

BOSCH SGS4HAW40G Dishwasher

BOSCH SGH4HVX32G Dishwasher

BOSCH SMS4ECI26E Dishwasher

BOSCH SMS6EDI02G Free-Standing Dishwasher

BOSCH SMS6EDW02G Free-Standing Dishwasher

BOSCH SMV4HTX27G Dishwasher

BOSCH SMV4HCX48E Dishwasher









































