BOSCH SMS6ZCI01P Dishwasher

1

2

en  

Before using for the first time, read the instruction manual and the safety information it contains.  

Setting up Home Connect  

Overview of water hardness settings  

Setting the water softening sys-  

tem  

Programmes  

You can find an overview of the  

water hardness values that can  

be selected here.  

A table of country-specific units  

can be found in the instruction  

manual.  

The programme data has been meas-  

ured in the laboratory according to  

European standard EN 60436.  

The consumption figures depend on  

the programme and additional func-  

tion selected.  

The running time will change if the  

rinse aid system is switched off or  

rinse aid needs to be added.  

Medium  

Medium  

Medium  

Hard  

Hard  

Hard  

1.5 - 1.8  

1.9 - 2.1  

2.2 - 2.9  

3.0 - 3.7  

3.8 - 5.4  

5.5 - 8.9  

H:02  

H:03  

H:04  

H:05  

H:06  

H:07  

Tip: Connect your appliance to a mobile device. You can con-  

veniently change all settings using the Home Connect app.  

1. Press  

.

2. To open the basic settings, press  

for 3 seconds.  

a The display shows H:xx.  

1. Install the Home Connect app on your mobile device and fol-  

low the instructions.  

2. Scan the QR code with the Home Connect  

app.  

a The display shows  

.

3. Press  

or repeatedly until the  

Hardness mmol/l  

range  

Setting  

value  

right water hardness has been set.  

4. To save the settings, press  

for 3 seconds.  

Soft  

Soft  

0 - 1.1  

1.2 - 1.4  

H:00  

H:01  

Programme  

1) Duration [h:min]  

2) Energy consump-  

tion [kWh]  

3) Water [l]  

1) 2:25 - 2:30  

2) 1.150 - 1.250  

3) 10.5 - 13.5  

1) 1:40 - 2:40  

2) 0.680 - 1.300  

3) 7.0 - 15.5  

1) 3:35  

Intensive 70°  

Auto 45-65°  

Eco 50°  

Adding special salt  

To avoid damage to the appliance, only add special  

salt to the dispenser for special salt just before the  

programme starts.  

1. Unscrew the lid of the dispenser for special salt  

and remove.  

2. On initial start-up: Fill the dispenser right up with  

water.  

3. Add the special salt to the  

dispenser. The water in the  

dispenser is displaced and  

forced out. Never add de-  

tergent.  

2) 0.645  

3) 9.0  

1) 2:25 - 2:30  

2) 0.750 - 0.800  

3) 11.5 - 12.0  

1) 1:40 - 1:45  

2) 0.750 - 0.800  

3) 11.1 - 13.7  

1) 1:29  

Intelligent  

4. Place the lid back on the dispenser and turn to  

close.  

Glass 40°  

2) 1.050  

Adding rinse aid  

Express 60°  

Express 45°  

Machine Care  

Favourite  

3) 11.0  

1. Press the catch on the lid  

2. Add rinse aid up to the  

max mark.  

1) 0:35 ¹  

of the dispenser for rinse  

2) 0.710  

3) 10.5  

aid  

and lift  

.

1) 2:10  

2) 1.350  

3) 15.0  

1) 0:15 - 0:15  

2) 0.050 - 0.050  

3) 4.0 - 4.0  

3. Close the lid of the dispenser for rinse aid.  

a The lid clicks into position.  

1

half standard load  

Adding detergent  

1. Add the detergent to the  

dry detergent dispenser.  

2. Close the lid of the deter-  

gent dispenser.  

a The lid clicks into position.  

How to use your appliance  

1. Load the tableware.  

tate freely.  

2. Add detergent.  

3. Switch on the appliance  

4. Select the programme.  

5. Start the programme  

6. Remove the tableware at the end of the pro-  

gramme.  

7. To cancel the programme, press  

for  

Only clean tableware that is suitable for dish-  

washers. Remove large remnants of food from  

the tableware. Check that the spray arms can ro-  

approx. 4 seconds.  

.

The programme is cancelled and ends after ap-  

prox. 1 minute.  

.

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	BOSCH SMS6ZCI01P Dishwasher
Make	Bosch
Language	English
Filetype	PDF (Download)
File size	0.43 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Bosch

BOSCH SMS6ZCI01P Dishwasher Overview

Summary of Contents

• Page 1: Before using for the first time, read the instruction manual and the safety information it contains. Overview of water hardness settings. The programme data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional function selected. Connect your appliance to a mobile device. To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts. Add rinse aid up to the max mark. Add the detergent to the dry detergent dispenser. Load the tableware. Only clean tableware that is suitable for dishwashers.
• Page 2: Cleaning filters involves checking for residue after each wash, removing the filter system, and cleaning the filter elements under running water. For cleaning spray arms, check the outlet nozzles for blockages and ensure they can rotate freely. The wastewater pump should be checked for blockages and cleaned as necessary. Troubleshooting includes identifying faults such as water supply issues, blocked wastewater pumps, and improper rinse aid settings. Common faults include E:32-00 indicating a kinked supply hose and E:61-02 signaling a blocked wastewater pump. Rust spots on cutlery may result from insufficient rust resistance or washing rusting items together. Filters may become soiled or blocked, requiring cleaning to ensure proper function. Detergent residue can occur if the spray arms are blocked or if the detergent dispenser is not rinsed out properly. If all LEDs light up or flash, it indicates a fault detected by the electronics, requiring a reset. Ensure filters are inserted correctly and engaged to avoid issues with the appliance's operation.