BOSCH SRI4HKS53E 45cm 4 Partial Dishwasher
en
Before using for the first time, read the instruction manual and the safety information it contains.
Short and handy...
Overview of water hardness settings
Setting the water softening sys-
tem
Programmes
... everything your dishwasher needs.
You can find an overview of the
water hardness values that can
be selected here.
A table of country-specific units
can be found in the instruction
manual.
The programme data has been meas-
ured in the laboratory according to
European standard EN 60436.
The consumption figures depend on
the programme and additional func-
tion selected.
The runtime will change if the rinse
aid system is switched off or rinse aid
needs to be added.
Medium
Medium
Medium
Hard
Hard
Hard
1.5 - 1.8
1.9 - 2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5 - 8.9
H02
H03
H04
H05
H06
H07
1. Press
.
2. To open the basic settings, press
for 3 seconds.
a The display shows Hxx.
a The display shows
.
3. Press
repeatedly until the right
Hardness mmol/l
range
Setting
value
water hardness has been set.
4. To save the settings, press
for 3 seconds.
Soft
Soft
0 - 1.1
1.2 - 1.4
H00
H01
Programme
1) Duration [h:min]
2) Energy [kWh]
3) Water [l]
1) 1:55 - 2:05
2) 1,090 - 1,200
3) 10,5 - 13,0
1) 1:35 - 2:40
2) 0,650 - 1,100
3) 7,0 - 14,5
1) 3:40
Intensive 70°
Auto 45-65°
Eco 50°
Adding special salt
To avoid damage to the appliance, only add special
salt to the dispenser for special salt just before the
programme starts.
1. Unscrew the lid of the dispenser for special salt
and remove.
2. On initial start-up: Fill the dispenser right up with
water.
3. Add the special salt to the
dispenser. The water in the
dispenser is displaced and
forced out. Never add de-
tergent.
2) 0,704
3) 8,5
1) 4:00
2) 0,800
Silence 50 1
Express 65° - 1h
Machine Care
3) 9,6
1) 1:00
4. Place the lid back on the dispenser and turn to
close.
2) 1,050
3) 10,0
1) 2:10
2) 1,130
3) 15,0
Adding rinse aid
1) 0:15 - 0:15
2) 0,050 - 0,050
3) 4,0 - 4,0
1. Press the catch on the lid
2. Add rinse aid up to the
max mark.
of the dispenser for rinse
Favourite
aid
and lift
.
1
Suitable programme for running at night: it
takes longer, but is extremely quiet.
3. Close the lid of the dispenser for rinse aid.
a The lid clicks into position.
Adding detergent
1. Add the detergent to the
dry detergent dispenser.
2. Close the lid of the deter-
gent dispenser.
a The lid clicks into position.
How to use your appliance
1. Load the tableware.
tate freely.
2. Add detergent.
3. Switch on the appliance
4. Select the programme.
5. Start the programme
6. Remove the tableware at the end of the pro-
gramme.
7. To cancel the programme, press
approx. 4 seconds.
The programme is cancelled and ends after ap-
prox. 1 minute.
for
Only clean tableware that is suitable for dish-
washers. Remove large remnants of food from
the tableware. Check that the spray arms can ro-
.
.
General | Details |
---|---|
Name | BOSCH SRI4HKS53E 45cm 4 Partial Dishwasher |
Make | Bosch |
Language | English |
Filetype | PDF (Download) |
File size | 0.38 MB |

BOSCH SMV6ZCX49E-39 Dishwasher

BOSCH SMI4HVS33E Dishwasher

BOSCH SRV2HKX39G Dishwasher

BOSCH SGS4HAW40G Dishwasher

BOSCH SGH4HVX32G Dishwasher

BOSCH SMS4ECI26E Dishwasher

BOSCH SMS6EDI02G Free-Standing Dishwasher

BOSCH SMS6EDW02G Free-Standing Dishwasher

BOSCH SMV4HTX27G Dishwasher

BOSCH SMV4HCX48E Dishwasher

BOSCH SRI4HKS53E 45cm 4 Partial Dishwasher Overview
Summary of Contents
- Page 1: Before using for the first time, read the instruction manual and the safety information it contains. Overview of water hardness settings. The programme data has been measured in the laboratory according to European standard EN 60436. The consumption figures depend on the programme and additional function selected. To avoid damage to the appliance, only add special salt to the dispenser for special salt just before the programme starts. Add rinse aid up to the max mark of the dispenser for rinse aid. Suitable programme for running at night: it takes longer, but is extremely quiet. Load the tableware. Only clean tableware that is suitable for dishwashers. Remove large remnants of food from the tableware.
- Page 2: Cleaning filters After each wash check the filters for residue. Remove the filter system. Clean the filter elements under running water. Re-assemble the filter system. Insert the filter system into the appliance and turn the coarse filter clockwise. Cleaning spray arms Check the outlet nozzles on the spray arms for blockages under running water. Insert the lower spray arm. Insert the upper spray arms and screw firmly in place. Clean wastewater pump Disconnect the appliance from the power supply. Lift the pump cover inwards at an angle and remove. Remove any remnants of food and foreign bodies in the area of the impeller. Troubleshooting E:32-00 will light up alternately or indicator for water supply lights up. Supply hose is kinked. E:92-40 will light up alternately. Filters are soiled or blocked. Rust spots on cutlery. Remnants of food on tableware. Detergent residue is present in the detergent dispenser or the tablet collecting tray. Spray arm rotation is blocked. All LEDs light up or flash or the rinse programme does not continue running. Washing programme selected too weak.