centerline CDH-1 51 Racks Hour Door Type Dishwasher

1

2

CUH/CUL  

CDH/CDL  

SCAN TO VISIT THE  

CENTERLINE^™ RESOURCE CENTER  

OPERATION and ERROR CARD  

2

3

5

4

1

7

6

4. DELIME BUTTON*  

1. POWER/DRAIN BUTTON  

Pressing and holding (3 seconds) activates  

the deliming cycle.  

Pressing this button switches the machine  

on, fills and heats the wash tank. Pressing  

and holding (3 seconds) activates self-  

cleaning cycle, drains machine, and then  

switches the machine off automatically.  

After machine is switched off, however, the  

machine still has voltage.  

5. TEMPERATURE DISPLAY, WASH TANK  

Displays wash tank temperature while  

machine is in ready state or in a wash cycle.  

6. TEMPERATURE DISPLAY, RINSE  

Displays rinse temperature only when rinse is  

active.  

2. START BUTTON  

CUH & CUL  

CDH & CDL  

Pressing this button  

starts the wash  

cycle. If pressed  

a 2nd time within  

10 seconds of the  

first press, the  

After closing the  

door to start the  

wash cycle, pressing  

this button within  

10 seconds of  

7. TEMPERATURE UNITS  

LED lights for °F or °C.  

WASH PROGRAM  

CUH & CUL  

CDH & CDL  

Normal wash  

the cycle starting  

activates the  

Normal wash  

for average soiled  

dishes – 2 minutes  

extended wash cycle  

is activated.  

for average soiled  

dishes – 1 minute  

extended wash cycle.  

Extended wash  

for heavy soiled  

dishes – 3 to 6  

minutes*  

Extended wash  

for heavy soiled  

dishes – 3 to 6  

minutes*  

3. MENU BUTTON*  

Pressing this button enters the configuration  

menu.  

*For more detail review Operation and Install manual  

ERROR  

SYMPTOM  

CODE  

POSSIBLE SOLUTION*  

1. Press the power button to power off (Provide 20 min to cool off).  

Booster Temperature  

2. Restart as normal.  

01  

Temperature above upper limit  

3. If error continues to display, possible high limit trip or heating element malfunction – contact  

Hobart Service.  

1. Press the power button to power off.  

Booster Temperature  

2. Restart as normal.  

02  

Temperature below lower limit  

3. If error continues to display, possible high limit trip or heating element malfunction – contact  

Hobart Service.  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	centerline CDH-1 51 Racks Hour Door Type Dishwasher
Make	Centerline
Language	English
Filetype	PDF (Download)
File size	0.07 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• Centerline

centerline CDH-1 51 Racks Hour Door Type Dishwasher Overview

Summary of Contents

• Page 1: Operation and error card Delime button activates the deliming cycle. Power/drain button switches the machine on, fills and heats the wash tank, and activates self-cleaning cycle. Temperature display shows wash tank temperature in ready state or wash cycle. Temperature display for rinse shows rinse temperature only when active. Start button initiates the wash cycle. Menu button enters the configuration menu. Normal wash cycle is for average soiled dishes. Extended wash cycles are available for heavy soiled dishes. Error codes provide possible solutions for temperature issues. Contact Hobart Service for persistent error displays.
• Page 2: Error codes and symptoms are listed for troubleshooting. When the booster does not reach temperature or water level, a long wash cycle will trigger. If the error continues, it may indicate a high limit trip or heating element malfunction. Press the power button to power off and allow the machine to cool off. For voltage issues, check the booster and wash tank pressure level sensors. Verify that the drain hose is not pinched or kinked to avoid drain overflow limits. Check for clogged nozzles in wash and rinse arms if the fill time is exceeded. Low or no chemicals can cause a chemical deficiency error. Ensure the door is closed during fill, wash, or delime cycles to avoid program interruptions. Rinse temperature must meet or exceed the setpoint to clear low rinse temperature errors. If USB drive issues arise, it may be due to improper configuration or incorrect directory path.