CMA H-1X Undercounter Dishwasher
Operation
NORMAL WASH MODE
Control Panel
In Cycle
LED Light
Start
Push Button
Prime
Push Button
ON/OFF- DRAIN
POWER SWITCH
Wait
LED Light
LCD
1. Close the door dishwasher front door.
2. Push the Power Switch UP to turn on power.
3. The power switch will illuminate and the machine will fill with water.
4. Wait until the wash temperature indicates a minimum of 150°F/66°C.
PLACE AN EMPTY DISH RACK IN MACHINE AND RUN FIRST CYCLE EMPTY TO HEAT
WASH TANK INTERIOR
.
5. Load the dish rack into the machine. Wash one dish rack at a time.
6. Close the door and press the green start button for 1 second. The green in-cycle light will
illuminate and the cycle will begin.
8
The final rinse cycle begins at the end of the wash cycle. The machine drains and refills with
fresh hot water. The final rinse must indicate a minimum of 180-195°F/82-92°C.
9. Open the door and remove the wares when the green cycle light goes out.
! ATTENTION !
RINSE SENTRY MODE WILL EXTEND WASH CYCLE TIME
In the event the final rinse temperature has not reached 180-195°F/82-92°C. After the
wash cycle, the rinse sentry will extend the wash cycle time until the booster reaches
180-195°F/82-92°C. If the proper temperature is not reached within 5 minutes, the
machine will leave the rinse sentry mode and complete the cycle.
13
| General | Details |
|---|---|
| Name | CMA H-1X Undercounter Dishwasher |
| Make | CMA |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.94 MB |
(1 votes, average: 5.00 out of 5)
Loading...
CMA UC65e M3 Undercounter Dishwasher
CMA-66 EST-66 Conveyor Dishwasher
CMA EST-FL1 EST Front Loader Water Dishwasher
BOSCH SMI2ITS33E Dishwasher
BOSCH SMH4ECX14E Dishwasher
SIEMENS SN97T801BE Dishwasher
BOSCH SMV4HCX58E-39 Dishwasher
FISHER and PAYKEL DD24DTX6I1 Tall Dishwasher
eta 239490001B Dishwasher
ETNA VWV142ZWA Dishwasher
Smeg ST292D Dishwasher
FISHER and PAYKEL DW24UNT4X2 Contemporary Tall Dishwasher
LIVINOX LDW-14P-8BL Dishwasher