×
- 1. Installation/operation Manual (High Temperature → Undercounter Dishwasher → High Temperature Wash And Drain → With Built-in Booster And Pumped Final Rinse)
- 2. Product Registration (Online)
- 3. For Future Reference, Record Your Dishwasher Information In The Box Below.
- 4. Revision History (Specifications Are Subject To Change Based On Continual Product Improvement.)
- 5. Installation (Operation → Cleaning → Maintenance → Diagnostic Features)
- 6. Installation (Water Connection → Note: → Caution:)
- 7. Installation (Drain Connection → The Drain Hose Is Looped And Clamped And Must Not Be Changed.)
- 8. Installation (Drain Connection → Attention)
- 9. Installation (Drain Hose → Indirect Drain Connection)
- 10. Installation (Electrical Connection → Single Phase Power Connection → How To Connect 1 Phase Power)
- 11. Installation (Electrical Connection → Connect Power To The Main Terminal Block → Single Phase Power Requirement)
- 12. Installation (Electrical Connection → Connect Power To The Main Terminal Block)
- 13. Installation (Electrical Connection → Connect Power To The Main Terminal Block)
- 14. Installation (Booster Fill Procedure)
- 15. Initial Start-up (Chemical Dispensing Pumps → Detergent Pump → Rinse-aid Pump)
- 16. Installation (Priming The Chemical Dispensing Pumps → Very Important → Inspect And Replace The Chemical Dispensing Pump Squeeze Tubes Every Six Months.)
- 17. Operation (Normal Wash Mode → Control Panel → Wash Tank Interior → Rinse Sentry Mode Will Extend Wash Cycle Time)
- 18. Operation (Loading Dish Racks → Very Important)
- 19. Operation (Loading Dish Racks)
- 20. Operation (Operational Display → Start-up Sequence)
- 21. Operation (Sump Fill Level → Wash Cycle → Drain → Rinse)
- 22. Operation (Rinse Sentry → Autoclean Drain)
- 23. Cleaning The Wash Tank (Very Important → Drain And Clean The Dishwasher Every 2 Hours Of Continuous Operation, After Each Meal Period And At The End Of The Day. → Do Not Use Metallic Scrub Pads To Clean The Machine. → Do Not Spray The Exterior Of The Machine With Water.)
- 24. Cleaning (Cleaning The Spray Arms)
- 25. Cleaning (Cleaning The Scrap Screen → Sump Strainer)
- 26. Deliming (Warning → Deliming Solution And Other Acids Must Never Be Mixed With Chlorine, Iodine, Bromine, Or Fluorine. → Always Wear Protective Clothing And Goggles When Handling Chemicals. → Deliming Is Complete.)
- 27. Maintenance Schedules (Daily Maintenance → Weekly Maintenance → Semi-annual Maintenance → Yearly Maintenance)
- 28. Diagnostics (Rinse Aid)
- 29. Parameter Setting Instructions (Wash Temperature Adjustment → Detergent Concentration → Rinse Temp → Board Settings)
- 30.
- 31.
×
CMA H-1X Undercounter Dishwasher
Cleaning
Cleaning the spray arms:
1. Unscrew the retaining screw from the upper and lower interchangeable spray arms.
2. Flush the spray arms clean in a sink. Be sure to flush the spray arm bearings.
USE GROVES TO LOSEN
HUB FOR CLEANING.
USE PAPER
CLIP TO
CLEAN NOZZLES
USE COIN
OR FLAT HEAD
DRIVER AND FLUSH
SPRAY ARM
20
| General | Details |
|---|---|
| Name | CMA H-1X Undercounter Dishwasher |
| Make | CMA |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.94 MB |
CMA UC65e M3 Undercounter Dishwasher

CMA-66 EST-66 Conveyor Dishwasher

CMA EST-FL1 EST Front Loader Water Dishwasher


CMA DISHMACHINES UC65e M3 Dishwasher

Haier HDW15F3S1 Dishwasher

FISHER AND PAYKEL DD24DI9 N Dishwasher

Fisher and Paykel DW60FC2X2 Dishwasher

Amica EGSP 14797-1 E Dishwasher

FISHER AND PAYKEL DD24STI9 Dishwasher

Di LUSSO DW269SS Dishwasher

AEG FSK73767P Dishwasher

GE EDW4000 Triton XL Dishwasher

IKEA TORSBODA Integrated Dishwasher
Table of Contents
- 1. Installation/operati... Manual - High Temperature →
- 2. Product Registration - Online →
- 3. For Future Reference, Record Your Dishwasher Information In ... →
- 4. Revision History - Specifications Are Subject To Change Base... →
- 5. Installation - Operation →
- 6. Installation - Water Connection →
- 7. Installation - Drain Connection →
- 8. Installation - Drain Connection →
- 9. Installation - Drain Hose →
- 10. Installation - Electrical Connection →
- 11. Installation - Electrical Connection →
- 12. Installation - Electrical Connection →
- 13. Installation - Electrical Connection →
- 14. Installation - Booster Fill Procedure →
- 15. Initial Start-up - Chemical Dispensing Pumps →
- 16. Installation - Priming The Chemical Dispensing Pumps →
- 17. Operation - Normal Wash Mode →
- 18. Operation - Loading Dish Racks →
- 19. Operation - Loading Dish Racks →
- 20. Operation - Operational Display →
- 21. Operation - Sump Fill Level →
- 22. Operation - Rinse Sentry →
- 23. Cleaning The Wash Tank - Very Important →
- 24. Cleaning - Cleaning The Spray Arms →
- 25. Cleaning - Cleaning The Scrap Screen →
- 26. Deliming - Warning →
- 27. Maintenance Schedules - Daily Maintenance →
- 28. Diagnostics - Rinse Aid →
- 29. Parameter Setting Instructions - Wash Temperature Adjustment →
- 30. Page 30 →
- 31. Page 31 →






































