Home > CMA > CMA H-1X Undercounter Dishwasher

CMA H-1X Undercounter Dishwasher

Maintenance  
MAINTENANCE SCHEDULES  
Daily Maintenance  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Check all of the wash arm and rinse arm spray jets and clean as necessary.  
Check scrap screen, and sump strainer and clean as necessary.  
Make sure the water supply is on and the drain is not clogged.  
Check the temperature display and ensure it is operating.  
Make sure the dish racks are in good condition.  
Check the chemical containers and refill as required.  
Follow the cleaning procedures.  
Weekly Maintenance  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
Perform Steps 1-6 in the Daily Maintenance.  
Inspect water lines for leaks.  
Check for water leaks underneath the dishwasher.  
Make sure the floor drain and/or drain lines are unobstructed.  
Make sure the dishwasher is level.  
Clean accumulated lime deposits from the wash tank heating element.  
Inspect the scrap screen and replace if damaged.  
Check the spray arms and replace or repair if damaged.  
8.  
9.  
Inspect machine interior for lime build-up (white haze) and delime if necessary.  
Consult the chemical supplier for deliming chemicals.  
Semi-Annual Maintenance  
1.  
Inspect the chemical dispensing pump tubing for cuts, kinks or bends and replace if  
necessary.  
2.  
Flush chemical tubing with hot water:  
Place an empty dish rack inside the dishwasher. Remove the pick-up tubes from the  
chemical containers. Place the tubes in a container of hot water and run the dishwasher  
for twenty cycles to thoroughly flush the lines. Check the lines to ensure  
they are unobstructed.  
3.  
4.  
5.  
Disassemble the detergent pump and replace the squeeze tube. Reassemble.  
Return the pick-up tubes into full chemical containers and return the machine to service.  
Detergent squeeze tubes should be inspected or replaced every six months.  
Yearly Maintenance  
Contact your authorized service agent for a preventive maintenance inspection.  
Lubrication  
There are no lubrication points for this dishwasher.  
23  
Blank  
This Page  
Intentionally  
Left Blank  
24  
Diagnostics  
DIAGNOSTIC FEATURES  
To access diagnostic features:  
1. Turn power switch to “OFF”.  
2. Push start button 3 times.  
3. Machine will now step through and operate the components as shown below.  
(continued on next page)  
25  
GeneralDetails
NameCMA H-1X Undercounter Dishwasher
MakeCMA
LanguageEnglish
FiletypePDF (Download)
File size1.94 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
CMA UC65e M3 Undercounter Dishwasher
CMA UC65e M3 Undercounter Dishwasher
CMA-66 EST-66 Conveyor Dishwasher
CMA-66 EST-66 Conveyor Dishwasher
CMA EST-FL1 EST Front Loader Water Dishwasher
CMA EST-FL1 EST Front Loader Water Dishwasher

CMA H-1X Undercounter Dishwasher