Home > COOKOLOGY > COOKOLOGY CFSD613WH Dishwasher

COOKOLOGY CFSD613WH Dishwasher

BUILT IN INSTALLTION  
Step 1. Selecting the best location for the dishwasher  
The installation position of dishwasher should be near the existing inlet and drain hoses and power cord.  
Illustrations of cabinet dimensions and installation position of the dishwasher.  
1.  
Less than 5 mm between the top of dishwasher and cabinet and the outer door aligned to cabinet.  
2.  
If dishwasher is installed at the corner of the cabinet, there  
should be some space when the door  
is opened.  
NOTE: Depending on where your electrical outlet is, you may need  
to cut a hole in the opposite cabinet side.  
FREESTANDING INSTALLTION  
Fitting between existing cabinets  
The height of the dishwasher, 845 mm, has been designed  
in order to allow the machine to be fitted between existing  
cabinets of the same height in modern fitted kitchens.  
The feet can be adjusted so that correct height is reached.  
The laminated top of the machine does not require any  
particular care since it is heatproof, scratchproof and stainproof.  
Underneath existing work top  
(When fitting beneath a work top)  
In most modern fitted kitchens there is only one single  
work top under which cabinets and electrical appliances  
are fitted. In this case remove the work top of the  
dishwasher by unscrewing the screws under the rear  
edge of the top (a).  
Attention  
After removing the work top, the screws must be screwed again under the rear edge of the top (b).  
GeneralDetails
NameCOOKOLOGY CFSD613WH Dishwasher
MakeCOOKOLOGY
LanguageEnglish
FiletypePDF (Download)
File size1.24 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
COOKOLOGY CBID601 Dishwasher
COOKOLOGY CBID601 Dishwasher
COOKOLOGY CSID601SS Dishwasher
COOKOLOGY CSID601SS Dishwasher
COOKOLOGY 45cm Dishwasher
COOKOLOGY 45cm Dishwasher

COOKOLOGY CFSD613WH Dishwasher