COSMO COS-DWD24FBR Front Tall Tub Dishwasher
PROBLEM
POSSIBLE CAUSE
SOLUTION
Food residue
remains on
the dishes
(cont.)
Detergent is too old.
Detergent must be fresh to
be effective. Store detergent
in a cool, dry area.
Detergent is caked in
the dispenser.
Do not allow detergent to sit
for several hours in a wet
dispenser. Clean dispenser
and refill with fresh, dry
detergent.
The pump or spray arm
is clogged with labels
from bottles and cans.
Check pump and spray arm
for labels and remove the
labels.
The pressure of the
water coming into the
home is too low.
Water pressure should be 20
to 80 psi (138 to 552 kPa) for
proper dishwasher fill. A
booster pump on the water
supply can be added if
pressure is too low.
High suds are slowing
the wash arm.
Use only detergent
recommended for the
dishwasher. Do not use soap
or laundry detergents.
SPOTS AND STAINS ON DISHES
PROBLEM
POSSIBLE CAUSE
SOLUTION
Spotting and
filming on
dishes
Add a liquid rinse aid to the
dispenser.
Rinse Aid dispenser is
empty.
Use a rinse aid and keep the
dispenser filled to help
eliminate spotting and
filming. Increase setting on
Rinse aid dispenser 1 number
per cycle until spotting is
eliminated.
Hard water. High
mineral content in your
water.
NOTE: If your water hardness
is 13 grains (223 ppm) or
above, it is strongly
recommended that you install
a home water softener.
For best results, water should
be a minimum 120°F (49°C) as
it enters the dishwasher.
Water temperature is
too low.
Use a minimum of 1 Tbsp.
(15g) of detergent per load.
Heavy soil and/or hard water
generally require extra
detergent.
Did not use enough
detergent.
35
| General | Details |
|---|---|
| Name | COSMO COS-DWD24FBR Front Tall Tub Dishwasher |
| Make | Cosmo |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.67 MB |























































