CMA DISHMACHINES AH Straight Thru Design Dishwasher

1

2

Models AH, C, B,  

CB and Scullery B  

Quick Setup  

MODEL AH REAR VIEW  

POWER SWITCH  

Instructions  

WARNING: Electrical and plumbing connections  

need to be made by a licensed service person  

and comply with all Federal, State and Local  

Health, Electrical, Plumbing and Safety codes.  

HARD WIRE  

POWER SUPPLY  

7-1/2"  

3/4" WATER  

INLET  

2

AUTO START  

SWITCH  

TUBE  

STIFFENER  

3

CHEMICAL  

TUBING  

3

11"  

2" DRAIN  

OUTLET  

1

STEP  

STEP  

STEP  

WHITE  

BLUE  

RED  

1

2

3

WALL  

DRAIN  

FLOOR DRAIN  

Connect the drain pipe from scrap  

accumulator to floor or wall drain.  

Connect dishmachine to hot water source  

recommended 140 temperature (120  

minimum temperature required).  

Insert tube stiffener with chemical tubing  

into each corresponding chemical  

dispensers.  

11-2016  

PN: 10130.07  

VIEW FULL SCREEN PDF MANUAL

General	Details
Name	CMA DISHMACHINES AH Straight Thru Design Dishwasher
Make	CMA Dishmachines
Language	English
Filetype	PDF (Download)
File size	0.25 MB

Download PDF

(1 votes, average: 5.00 out of 5)

Loading...

• ALL DISHWASHER INSTRUCTIONS & USER MANUALS
• CMA Dishmachines

CMA DISHMACHINES AH Straight Thru Design Dishwasher Overview

Summary of Contents

• Page 1: Models AH, C, B, CB and Scullery B Quick setup Power switch Electrical and plumbing connections need to be made by a licensed service person and comply with all Federal, State and Local Health, Electrical, Plumbing and Safety codes. Connect the drain pipe from scrap accumulator to floor or wall drain. Connect dishmachine to hot water source recommended 140 temperature (120 minimum temperature required). Insert tube stiffener with chemical tubing into each corresponding chemical dispensers.
• Page 2: Models AH, C, B, CB and Scullery B Model AH front view Electrical and plumbing connections need to be made by a licensed service person and comply with all Federal, State and Local Health, Electrical, Plumbing and Safety codes. Level dishmachine by adjusting leveling legs. Dishmachine must be level front to back and side to side to ensure proper performance. Press and hold down the three Prime Switches for the chemical pumps until product is discharging into the machine. Press and hold the Fill/Start Switch until the water level is approximately 1/2 to 3/4 below the overflow hole in the PVC standpipe. To start machine close the doors. The machine will automatically start and run through its cycle.