COSMO COS-DWD24FBR Front Tall Tub Dishwasher
PROBLEM
POSSIBLE CAUSE
SOLUTION
Spotting and
filming on
dishes (cont.)
Detergent is too old.
Detergent must be fresh and
dry to be effective. Store
detergent in a cool, dry area.
Home water pressure is
too low to fill
dishwasher properly.
Water pressure to the home
should be 20 to 80 psi (138 to
552 kPa) for proper
dishwasher fill. A booster
pump on the water supply
can be added if pressure is
too low.
Silica film or
etching
Using too much
detergent.
If you have soft water use less
detergent, but do not use less
than 1 Tbsp. (15 g) per load.
The inlet water
temperature exceeds
150°F (65°C).
Lower the incoming water
temperature.
Aluminum items
Hand wash aluminum items.
Remove aluminum markings
by using a mild abrasive
cleaner.
Black or gray
marks on
dishes
rubbing dishes during
washing. Disposable
aluminum items can
break down in the
dishwasher and cause
marking.
Orange stains
on plastic
dishes or
dishwasher
interior
Large amounts of
tomato-based foods
on dishes placed in the
dishwasher.
Use a stain removal product
to remove stains from your
dishwasher. Stains will not
affect dishwasher
performance.
DISHES DO NOT DRY COMPLETELY
PROBLEM
POSSIBLE CAUSE
SOLUTION
Dishes are not
completely dry
Do not overload dishwasher.
Place glasses and cups in the
rack so that the bottom
surface is slanted to allow
water to run off.
Dishes are not loaded
properly to allow water
drainage.
NOTE: Plastics
often need
towel drying.
Use a liquid rinse aid to speed
drying and keep the
dispenser full.
Rinse Aid not used or
dispenser is empty.
For dryer dishes, select a
Cycle that allows a Heated
Dry option.
Used an air dry or
energy-saving option.
36
| General | Details |
|---|---|
| Name | COSMO COS-DWD24FBR Front Tall Tub Dishwasher |
| Make | Cosmo |
| Language | English |
| Filetype | PDF (Download) |
| File size | 5.67 MB |























































