COVE DW2451-ADA Dishwasher
Cove Dishwashers
Electrical Requirements
Plumbing Requirements
Installation must comply with all applicable electrical
codes.
Installation must comply with all applicable plumbing
codes.
Locate the electrical supply within reach of the power
cord, likely in an adjacent cabinet. Refer to the illustrations
below. A separate circuit servicing only this appliance is
required. A ground fault circuit interrupter (GFCI) outlet or
breaker may be required, whichever complies with local
codes.
Locate the water supply and drain within reach of the
water and drain connections, likely in an adjacent cabi-
net. If necessary, the drain tubing can be extended by a
maximum of 5' (1.5 m). Route the water supply through the
shaded area shown in the illustration below. Connect the
water supply line to a hot water house supply with an easily
accessible shut-off valve between the supply and the unit.
ELECTRICAL REQUIREMENTS
The drain tube connection must be 20" (508) to 43" (1092)
above the bottom of the dishwasher leveling legs. Refer to
the illustration below.
Electrical Supply
Service
115 VAC, 60 Hz
15 amp dedicated circuit
3-prong grounding-type
6' (1.8 m)
Receptacle
Power Cord
PLUMBING REQUIREMENTS
Water Connection
5' (1.5 m) braided tubing with
3/8" female compression fitting
Drain Connection
Pressure
5' (1.5 m) corrugated tubing
30–140 psi (2–9.7 bar)
BACK OF
OPENING
ELECTRICAL
LOCATION
IN ADJACENT
CABINET
DRAIN
CONNECTION
2" (51)
BACK OF
OPENING
E
E
1
5 /2" (140)
TOE KICK
1
(
)
1 /2" 38
2" (51)
20"(508)
TO
FRONT VIEW
SIDE VIEW
43"(1092)
1
5 /2" (140)
Electrical location
Electrical routing
TOE KICK
1
(
)
1 /2" 38
SIDE VIEW
Water supply routing
Drain connection
coveappliance.com
|
7
| General | Details |
|---|---|
| Name | COVE DW2451-ADA Dishwasher |
| Make | Cove |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.45 MB |

COVE DW2451 Dishwasher

COVE DW2450, DW2450WS Dishwasher

DW2450 Cove Dishwasher

COVE DW2450 Dishwasher

























