EdgeStar DWP63BL Dishwasher
Parts Identification
Preparing the Dishwasher for Use
Unpacking the Dishwasher
Front View
Back View
Use at least two people to move and install the dishwasher to prevent back and other types of injuries. Carefully remove
the packaging materials. Remove any shipping tape and glue from your dishwasher before using. Do not use sharp
instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage
the surface of your dishwasher. Check to make sure the parts necessary for installation are included. If any parts are
missing, please contact our customer service. Put the dishwasher on a level and flat surface that is able to support the
Cup Shelf
Basket
entire weight of the dishwasher fully loaded.
Installation Requirements
The dishwasher has been designed for a countertop installation. Please follow the instructions for clearance, water, and
electrical requirements.
Clearance Requirements
The minimum height clearance required to install your dishwasher on a counter top surface with overhead cupboards is
17-¾” (45cm).
Water Requirements
Make sure the water supply/faucet connection is within reach of the inlet and drain hose assembly (i.e. 22-¾” / 58 cm). If
your sink has a spray wand, it is recommended that the hose be disconnected and the hole plugged.
Detergent
Dispenser
Spray Arm
Filter
Assy
Water Pressure
For best results, incoming water pressure should be between 15 and 20 pounds per square inch (psi).
Rinse Aid
Dispenser
Drain Port
Cutlery
Basket
Inlet Pipe
Connector
Water Temperature
For best results, the water temperature must be at least 120ºF (49ºC). To prevent damage to the dishwasher, the
temperature of the incoming water supply should not exceed 140ºF (60ºC).
CAUTION: A hose that attaches to a spray wand can burst if it is installed on the same
water line as the dishwasher.
!
Accessories
Inlet
Hose
Electrical Requirements
Read all safety precautions listed at the beginning of this manual. It is recommended that you use receptacles that cannot
Drain
Hose
be turned off by a switch or pull chain.
Faucet
Adapter
Make sure there is an electrical supply (outlet) within reach of the electrical power supply cord.
Quick
Connect
The dishwasher is equipped with a power supply cord having a 3-prong grounding plug. To minimize possible shock
hazard, the cord must be plugged into a mating 3-pronged and grounding-type wall receptacle providing 110-120V, 60Hz,
grounded in accordance with the National Electrical Code and local codes and ordinances. If a mating wall receptacle
is not available, it is the personal responsibility of the customer to have a properly grounded, 3-prong wall receptacle
installed by a certified electrician. Use a circuit that is rated for at least 10 Amps.
6
7
| General | Details |
|---|---|
| Name | EdgeStar DWP63BL Dishwasher |
| Make | EDGESTAR |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.5 MB |
(1 votes, average: 5.00 out of 5)
Loading...
EdgeStar DWP63BL Countertop Dishwasher
Midea MDW-14D8-OD Dishwasher
Danby DDW621WDB Dishwasher
BOSCH SMS4EMC06E Dishwasher
HAVA TDQR01 Compact Dishwasher
BOSCH Benchmark Series Dishwasher
SIEMENS SN55HS01MI Dishwasher
Whirlpool WFE2B19 Dishwasher
BOSCH SMI6ECS10E Dishwasher
FISHER PAYKEL DD24DT2NX9 Double Dishwasher
FISHER PAYKEL DW60U2I1 Integrated Dishwasher