Home > Electrolux > Electrolux EES48400L Dishwasher
Electrolux EES48400L Dishwasher
26
Problem and alarm code Possible cause and solution
The level of water inside
•
•
•
Switch the appliance off and on.
the appliance is too high.
Make sure that the filters are clean.
Make sure that the outlet hose is installed at the right
height above the floor. Refer to the installation in‐
structions.
The display shows iF1.
The appliance stops and
starts more times during
operation.
•
It is normal. It provides optimal cleaning results and
energy savings.
The programme lasts too
long.
•
•
If the delay start option is set, cancel the delay set‐
ting or wait for the end of the countdown.
Activating options increases the programme dura‐
tion.
The displayed programme
duration is different than
the duration in the con‐
sumption values table.
•
Refer to the consumption values table in the chapter
"Programme selection".
The remaining time in the
display increases and
skips nearly to the end of
the programme duration.
•
This is not a defect. The appliance is working cor‐
rectly.
Small leak from the appli‐
ance door.
•
•
The appliance is not levelled. Loosen or tighten the
adjustable feet (if applicable).
The appliance door is not centred on the tub. Adjust
the rear foot (if applicable).
The appliance door is diffi‐
cult to close.
•
•
The appliance is not levelled. Loosen or tighten the
adjustable feet (if applicable).
Parts of the tableware are protruding from the bas‐
kets.
The appliance door opens
during the wash cycle.
•
•
The AirDry function is activated. You can deactivate
the function. Refer to "Basic settings".
Rattling or knocking
sounds from the inside of
the appliance.
The tableware is not properly arranged in the bas‐
kets. Refer to basket loading leaflet.
Make sure that the spray arms can rotate freely.
•
•
The appliance trips the cir‐
cuit-beaker.
The amperage is insufficient to supply simultaneous‐
ly all the appliances in use. Check the socket amper‐
age and the capacity of the meter or turn off one of
the appliances in use.
Internal electrical fault of the appliance. Contact an
Authorised Service Centre.
•
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
For alarm codes not described in the
table, contact an Authorised Service
Centre.
| General | Details |
|---|---|
| Name | Electrolux EES48400L Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 1.91 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
Magic Chef MCSDW8TCST Dishwasher
HOBART S.48820 Commercial Dishwasher
Omega ODWIF6015 Integrated Dishwasher
centerline CDH-1 51 Racks Hour Door Type Dishwasher
NELSON AD60 Passthrough Dishwasher
Di LUSSO DW269SS Dishwasher
Whirlpool WDT550SAPW with 3rd Rack Dishwasher
InDeSIT DFE 1B19 X Dishwasher
FISHER PAYKEL DD24DDFTX9 N Dishwasher
esatto EBTDWW Benchtop Dishwasher