Home > Electrolux > Electrolux ESA47300UW Dishwasher
Electrolux ESA47300UW Dishwasher
12
Regeneration process
Each performed softener rinse (possible
more than one in the same cycle) may
prolong the programme duration by
another 5 minutes when it occurs at any
point at the beginning or in the middle of
a programme.
For the correct water softener operation,
the resin of the softener device needs to
be regenerated regularly. This process is
automatic and is the part of the normal
dishwasher operation.
When the prescribed quantity of water
(see values in the table) has been used
since the previous regeneration process,
a new regeneration process will be
initiated between the final rinse and the
programme end.
All the consumption values
mentioned in this section are
determined in line with the
currently applicable standard
in laboratory conditions with
water hardness 2.5mmol/L
(water softener: level 3)
according to the regulation:
2019/2022 .
Water softener
level
Amount of water
(l)
The pressure and the
1
2
250
100
62
47
25
17
10
5
temperature of water as well
as the variations of the
mains supply can change
the values.
3
4
How to set the water softener
level
Make sure the appliance is in user mode.
5
6
7
1. Press
.
8
•
•
•
The indicator
still flashes.
The remaining indicators are off.
The display shows the current
9
3
10
3
setting: e.g.
= level 5.
In case of the high water softener setting,
it may occur also in the middle of the
programme, before the rinse (twice
during a programme). Regeneration
initiation has no impact on the cycle
duration, unless it occurs in the middle of
a programme or at the end of a
programme with a short drying phase. In
such cases, the regeneration prolongs
the total duration of a programme by
additional 5 minutes.
2. Press repeatedly to change the
setting.
3. Press the on/off button to confirm the
setting.
7.3 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains. It is
automatically released during the final
rinse.
Subsequently, the rinsing of the water
softener that lasts 5 minutes may begin
in the same cycle or at the beginning of
the next programme. This activity
increases the total water consumption of
a programme by additional 4 litres and
the total energy consumption of a
programme by additional 2 Wh. The
rinsing of the softener ends with a
complete drain.
When the rinse aid chamber is empty,
the rinse aid indicator turns on. If the
drying results are satisfactory while using
multi-tablets only, you can deactivate the
notification for refilling the rinse aid.
However, for best drying performance,
always use rinse aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
| General | Details |
|---|---|
| Name | Electrolux ESA47300UW Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.97 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
Mueller DW-1800 Series 18 Inch Dishwasher
Miele HGXX Built Under Dishwasher
NEFF S975HKX20G Fully Int Slimline Dishwasher
FISHER PAYKEL DD24DCTX9N Tall Dishwasher
Omega ODW702X DishWasher
BOSCH SMS44DW01T Dishwasher
FISHER PAYKEL DD60DTX6HI1 Dishwasher
Electrolux A26298401 24 Dishwasher
BOSCH SMS45NI00Z Dishwasher
BOSCH SPI6EMS17E Dishwasher