Home > Electrolux > Electrolux ESA47300UW Dishwasher
Electrolux ESA47300UW Dishwasher
22
Problem and alarm code Possible cause and solution
The level of water inside
•
•
•
Switch the appliance off and on.
the appliance is too high.
Make sure that the filters are clean.
Make sure that the outlet hose is installed at the right
height above the floor. Refer to the installation in‐
structions.
The display shows iF1.
The appliance stops and
starts more times during
operation.
•
It is normal. It provides optimal cleaning results and
energy savings.
The programme lasts too
long.
•
•
If the delayed start is set, cancel the delay setting or
wait for the end of the countdown.
The displayed programme
duration is different than
the duration in the con‐
sumption values table.
The pressure and the temperature of the water, the
variations of the mains supply, the options, the quan‐
tity of dishes and the degree of soil can change the
programme duration.
The remaining time in the
display increases and
skips nearly to the end of
programme time.
•
This is not a defect. The appliance is working cor‐
rectly.
Small leak from the appli‐
ance door.
•
•
The appliance is not levelled. Loosen or tighten the
adjustable feet (if applicable).
The appliance door is not centred on the tub. Adjust
the rear foot (if applicable).
The appliance door is diffi‐
cult to close.
•
•
The appliance is not levelled. Loosen or tighten the
adjustable feet (if applicable).
Parts of the tableware are protruding from the bas‐
kets.
The appliance door opens
during the wash cycle.
•
•
The AirDry function is activated. You can deactivate
the function. Refer to "Settings".
Rattling/knocking sounds
from inside the appliance.
The tableware is not properly arranged in the bas‐
kets. Refer to basket loading leaflet.
Make sure that the spray arms can rotate freely.
•
•
The appliance trips the cir‐
cuit-beaker.
The amperage is insufficient to supply simultaneous‐
ly all the appliances in use. Check the socket amper‐
age and the capacity of the meter or turn off one of
the appliances in use.
Internal electrical fault of the appliance. Contact an
Authorised Service Centre.
•
For alarm codes not described in the
table, contact an Authorised Service
Centre.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
Once you have checked the appliance,
deactivate and activate the appliance. If
the problem occurs again, contact an
Authorised Service Centre.
| General | Details |
|---|---|
| Name | Electrolux ESA47300UW Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.97 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
FISHER PAYKEL DD60SCX9 Sanitise Single DishDrawer Dishwasher
BOSH SMD8YCX03G Fully Integrated Dishwasher
FISHER PAYKEL DD60SDFHX9 Single DishDrawer Dishwasher
FISHER PAYKEL DD60SHTI9 Dishwasher
LG LD-2130-1-W-S-M-H Dishwasher
baridi DH224A Mini Tabletop Dishwasher
Midea MDF24P2B Dishwasher
FISHER and PAYKEL DW24UNT4X2 Contemporary Tall Dishwasher
FISHER PAYKEL DD60DDFHX9 Dishwasher
SHARP SDW6888JS Smart Dishwasher