Home > Electrolux > Electrolux ESL424 Dishwasher

Electrolux ESL424 Dishwasher

Something not working  
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer.  
Before contacting your local Service Force Centre, please carry out the checks listed below.  
Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation a charge will  
be made even if the appliance is in guarantee.  
Symptom  
Solution  
The machine will not start  
The door has not been properly closed.  
The plug is not properly inserted in the power socket.  
There is a power failure.  
The machine does not fill  
with water  
Ensure the water tap is open.  
Ensure the mains water supply has not been cut off.  
The inlet hose may be squashed or bent. Reposition the hose.  
The inlet hose may be blocked. Switch off the water supply and clean the  
filter.  
The filters are blocked  
Clean the filters (refer to "Maintenance and cleaning").  
The spray arms are not rotating  
The dishwasher will not drain  
Ensure the crockery is loaded correctly.  
The drain hose may be squashed or bent. Reposition the hose.  
The sink may be blocked. Clear any blockages.  
The drain hose extension is not correct. Follow the instructions for connecting  
to the waste.  
There is no vent in the end of the drain hose.  
The machine is noisy  
Dishes are rattling against each other, refer to “Loading your machine”.  
The spray arms are knocking against the dishes. Refer to "Loading your  
machine".  
The door is difficult to close  
The dishwasher is not level, or not properly built-in.  
Visible lime deposits or white  
film on the dishes  
Check that there is salt and that the salt cap is tight.  
Check that the right level of the water softener is set.  
The dishes are not quite dry  
The rinse aid has run out or too little is being used.  
The dishes are not clean  
(poor wash)  
The baskets are too full.  
The dishes have not been arranged properly.  
The spray arms do not rotate  
The spray arms are clogged.  
The filters are clogged.  
The filters are not in the correct position.  
Not enough detergent has been used or it is unsuitable.  
The detergent is old or has gone hard.  
The salt container cap is not properly closed.  
The washing programme selected is too gentle.  
If after all these checks, the problem persists, contact your  
local Service Force Centre, quoting the model and serial  
number. This information can be found on the rating plate  
located on the right hand side of the dishwasher door (see  
picture).  
This product should be serviced by an authorised Service  
engineer, and only genuine spare parts should be used.  
Under no circumstances should you attempt to repair the  
machine yourself.  
Repairs carried out by inexperienced persons may cause  
injury or serious malfunctioning.  
Contact your local Service Force Centre.  
Always insist on genuine spare parts.  
Prod.No. ........ Ser. No. .........  
Mod. ........  
RA01  
11  
GeneralDetails
NameElectrolux ESL424 Dishwasher
MakeElectrolux
LanguageEnglish
FiletypePDF (Download)
File size0.43 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher

Electrolux ESL424 Dishwasher