Home > Electrolux > Electrolux ESL424 Dishwasher
Electrolux ESL424 Dishwasher
Maintenance and cleaning
Internal cleaning
External cleaning
Ensure that the seals around the door, the detergent and rinse
aid dispensers are cleaned regularly with a damp cloth.
Clean the external surfaces of the machine and control panel
with a damp soft cloth. If necessary use only neutral
detergents. Never use abrasive products, scouring pads or
solvent (acetone, trichloroethylene etc....).
We recommend the use of Finish Dishwasher Cleaner every
3 months or run a 65°C wash without dishes using detergent.
Regular use of Finish Dishwasher Cleaner cleans inaccessible
parts, eliminates unpleasant food odours and helps prevent the
build-up of limescale.
Prolonged periods of non-operation
If you are not using the machine for any period of time you
are advised to:
Cleaning the central filters
(After each wash)
1. Unplug the appliance and then turn off the water.
Inspect the central filters (B) and (C) and remove any scraps of
food with a brush, under running water.
2. Fill the rinse aid dispenser.
3. Leave the door ajar to prevent the formation of any
unpleasant smells.
Filters (B) and (C) are both removed by lifting up the outer one
(B) (pulling the central funnel upwards); the smaller filter (C)
can be removed by pressing the two tongues (D).
4. Leave the inside of the machine clean.
Once cleaned, refit the filters by pressing them down until they
click into place.
Frost precautions
Avoid placing the machine in a location where the temperature
is below 0°C. If this is unavoidable, empty the machine, close
the appliance door, disconnect the water inlet pipe and empty
it.
C
D
B
Moving the machine
If you have to move the machine (moving house etc....):
MA02
MA08
1. Unplug it.
Cleaning the large filter
(every week)
2. Turn the water tap off.
Clean the large filter (A) on both sides under running water,
using a brush.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses.
Avoid over tilting the machine during transportation.
To take it out, remove the spray arm by pressing the two
tongues (E), turn the ring (F) anticlockwise and then slide the
whole part out. Refit the filter following the above instructions
in reverse order.
E
A
F
MA03
The dishwasher must not be used without filters.
Incorrect repositioning and fitting of the filters will
produce poor washing results.
Cleaning the filters is vital to ensure correct operation of
the machine.
10
| General | Details |
|---|---|
| Name | Electrolux ESL424 Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.43 MB |

Electrolux ESS87300UX Dishwasher

Electrolux EES48401L Dishwasher

Electrolux EFF9392SXA Dishwasher

Electrolux ESZ89400UX 800 SprayZone Dishwasher

Electrolux ESL2500RO Dishwasher

Electrolux KECA7400W Builtin Dishwasher

Electrolux TAPPAN Dishwasher

Electrolux KESC7320L Dishwasher

Electrolux EEC87400W Sliding Door Dishwasher

Electrolux EEA27200L Dishwasher





























