Home > Electrolux > Electrolux ESL424 Dishwasher
Electrolux ESL424 Dishwasher
Before use
Before using your dishwasher for the
first time:
Levels 4 and 5
(adjustment on the machine)
A
If your water is level 4 or 5,
open the door and drill
membrane (A) on the upper
left-hand corner of the
machine.
1. Ensure that the electrical and water connections comply
with the installation instructions.
2. Remove all packaging from inside the appliance.
3. Set the water softener.
4. Pour a litre of water inside the salt container and then fill
with salt.
AA04
5. Fill the rinse aid dispenser.
With a water hardness of level 5 both adjustments must be
made.
Setting the water softener
The dishwasher is equipped with a water softener designed to
remove minerals and salts from the water supply, which would
have a detrimental or adverse effect on the operation of the
appliance.
Filling with salt
Only use salt specifically designed for use in
dishwashers.
All other types of salt not specifically designed for use in
a dishwasher, especially table salt, will damage the water
softener.
Only fill with salt just before starting one of the complete
washing programmes (not the Rinse and Hold
programme). This will prevent any grains of salt or salty
water, which may have been spilled, remaining on the
bottom of the machine for any period of time, which may
cause corrosion.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, Clarke,
French degrees and PPM (parts per Million).
The softener should be adjusted according to the hardness of
the water in your area. Your local Water Authority can advise
you on the hardness of the water in your area.
The dishwasher is factory set at level 2.
If this level is not suitable for your area the softener should be
adjusted.
Water hardness
Water
softener
Adjustment
on the
adjustment machine
Clarke
degrees
French
degrees
(°TH)
PPM
(Parts per
Million)
To fill:
1. To fill with salt, unscrew the cap of the salt container.
Level
0 - 10
0 - 14
0 - 140
1
2
3
4
5
NO
NO
NO
NO
2. Pour a litre of water inside the container (this is
necessary only before filling with salt for the first time).
11 - 27 15 - 39 141 - 390
28 - 35 40 - 50 400 - 500
36 - 49 51 - 70 501 - 700
50 - 63 71 - 90 701 - 900
YES
NO
NO
3. Using the funnel provided,
pour in the salt until the
container is full.
E
YES
YES
L
A
T
S
L
A
Z
S
L
A
YES
S
L
Do not worry if water over
flows from the unit when
filling with salt, this is quite
normal.
E
S
To adjust the water softener
4. Replace the cap making
sure that there is no trace
of salt on the screw thread
or on the gasket.
Level 1
If your water is "level 1" it is already soft and therefore there is
no need to use salt.
SR02
5. Screw on the cap tightly.
Levels 3 and 5
(water softener adjustment)
The salt container will require topping up periodically.
If your water is level 3 or 5, proceed as follows:
- slide out the lower basket and unscrew the cap of the salt
container;
The salt cap has a refill
indicator window in the
centre.
A green float is clearly
visible when there is salt
inside the container, and
almost disappears when the
salt has finished reminding
you to add salt.
- turn the two-position
selector anticlockwise from
position - to position + with
the aid of a blunt knife or
screwdriver.
SR11
AA01
5
| General | Details |
|---|---|
| Name | Electrolux ESL424 Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.43 MB |

Electrolux ESS87300UX Dishwasher

Electrolux EES48401L Dishwasher

Electrolux EFF9392SXA Dishwasher

Electrolux ESL2500RO Dishwasher

Electrolux ESZ89400UX 800 SprayZone Dishwasher

Electrolux KECA7400W Builtin Dishwasher

Electrolux TAPPAN Dishwasher

Electrolux KESC7320L Dishwasher

Electrolux EEC87400W Sliding Door Dishwasher

Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher





























