Home > Electrolux > Electrolux ESL424 Dishwasher
Electrolux ESL424 Dishwasher
Installation instructions
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
The waste connection must be at a height of between 30 cm
(minimum) and 100 cm (maximum) from the bottom of the
dishwasher.
Any plumbing work required to install this appliance
should be carried out by a qualified plumber or competent
person.
The drain hose can face either to the right or left of the
dishwasher
Ensure the hose is not bent or squashed as this could prevent
or slow down the discharge of water.
Remove all packaging before positioning the machine.
If possible, position the machine next to a water tap and a
drain.
If you use a drain hose extension it must be no longer than 2
metres and its internal diameter must be no smaller than the
diameter of the hose provided.
Attention!
Carefully follow the instructions on the enclosed template
for building in the dishwasher and fitting the furniture panel.
Water supply connections
This dishwasher must be plumbed into a cold water supply.
The water pressure must be within the limits given in the
technical specifications.
+ 2 m max
CS14
Your local Water Authority will advise you on the average
mains pressure in your area.
Likewise the internal diameter of the couplings used for
connections to the waste outlet must be no smaller than the
diameter of the hose provided.
The dishwasher features fill and drain hoses which can be
turned either to the left or the right to suit the installation. The
locknut must be correctly fitted to avoid water leaks.
The sink plug must not be in place when the machine is
draining as this could cause the water to siphon back into
the machine.
Avoid bends or kinks in the hose which could prevent or slow
down the water supply.
If the machine is connected to new pipes or pipes which have
not been used for a long time, you should run the water for a
few minutes before connecting the inlet hose. This will prevent
deposits of sand or rust clogging the inlet hose filter.
Attention!
Our appliances are supplied with a security device to
protect against the return of dirty water back into the
machine.
Do not use, for the connection, old hoses which have
been used in another appliance.
If the spigot of your sink has a "no return valve"
incorporated this can prevent the correct draining of your
dishwasher.
We advise you therefore to remove it.
Water outlet hose connection
The end of the drain hose can be connected in the following
ways:
1. To the sink outlet spigot, securing it if necessary with a clip.
2. To a stand pipe provided with vent-hole, minimum internal
diameter 4 cm.
1
2
CS13
13
| General | Details |
|---|---|
| Name | Electrolux ESL424 Dishwasher |
| Make | Electrolux |
| Language | English |
| Filetype | PDF (Download) |
| File size | 0.43 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Electrolux ESS87300UX Dishwasher
Electrolux EES48401L Dishwasher
Electrolux EFF9392SXA Dishwasher
Electrolux ESZ89400UX 800 SprayZone Dishwasher
Electrolux ESL2500RO Dishwasher
Electrolux KECA7400W Builtin Dishwasher
Electrolux TAPPAN Dishwasher
Electrolux KESC7320L Dishwasher
Electrolux EEC87400W Sliding Door Dishwasher
Electrolux EFC3862MS UltimateCare 300 Compact Dishwasher
rhima RU-50 Under Bench Dishwasher
GE PDP755SYV Profile UltraFresh System Dishwasher
BOSCH SMI6ZDS49E-39 Dishwasher
SIEMENS SR93EX24MG Fully Integrated Dishwasher
BOSCH SCX6ITB00E Dishwasher
FRIGIDAIRE FFCD2413US Dishwasher
FISHER and PAYKEL DD60SCX9 Dishwasher
FISHER AND PAYKEL DW24U6I1 Dishwasher
GE APPLIANCES GDT650SYV Interior Dishwasher with Hidden Controls
FISHER PAYKEL DW60UC6B Built Under Dishwasher