Home > ETNA > ETNA VWV142ZWA Dishwasher

ETNA VWV142ZWA Dishwasher

ERRORS  
Problem  
Potential causes  
Solution  
Contamination of the  
tub.  
Poor quality detergent.  
Only use detergent suitable  
for dishwashers to prevent  
contamination.  
Blocked filters.  
Open the door and clean the filters.  
Run the pre-wash cycle.  
Rinse agent has been spilled. Always wipe up spilled rinse agent  
immediately.  
Foam in the tub.  
Wrong detergent.  
Use only the special dishwasher  
detergent to avoid suds. If this  
occurs, open the dishwasher and  
let suds evaporate. Add 1 liter of  
cold water to the bottom of the  
dishwasher. Close the dishwasher  
door, then select any cycle. Initially,  
the dishwasher will drain out the  
water. Open the door after draining  
stage is complete and check if the  
suds have disappeared. Repeat if  
necessary.  
Dishes are not dry.  
The rinse agent reservoir is  
empty.  
Ensure that the rinse agent reservoir  
is filled.  
Improper loading.  
Load the dishwasher as suggested in  
the manual.  
The dishwasher is unloaded  
too soon.  
Do not unload your dishwasher  
immediately after washing. Open the  
door slightly so the steam can come  
out. Wait for the inside temperature  
to be safe. Unload the lower basket  
first.  
Incorrect cycle.  
A short program with low temperature  
can have worse washing and drying  
results compared to a longer program  
with a higher temperature. Select  
another wash cycle.  
EN 25  
GeneralDetails
NameETNA VWV142ZWA Dishwasher
MakeETNA
LanguageEnglish
FiletypePDF (Download)
File size10.18 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

ETNA VWV142ZWA Dishwasher