ETNA VWV142ZWA Dishwasher
USING YOUR DISHWASHER
Filling the rinse aid reservoir
1. Open the reservoir cap.
2. Carefully pour in the rinse-aid into its dispenser, whilst avoiding it to overflow.
3. Close the reservoir cap.
Note: Clean up any spilled rinse aid with an absorbent cloth to avoid excessive foaming
during the next wash.
Adjusting the rinse aid reservoir
To achieve a better drying performance with limited rinse aid, the dishwasher is designed to
adjust the consumption by the user. If the dishes are not drying properly or are spotted, select
a higher setting until your dishes are spot-free. Select a lower setting if there are sticky whitish
stains on your dishes or a bluish film on glassware or knife blades.
1. Close the door and switch on the appliance.
2. Within 60 seconds after step 1, press the program button for more than 5 seconds.
3. Press the delayed start button to enter the setting mode. The rinse aid indicator blinks.
4. Press the program button again to select the proper setting according to your using habits.
The settings will change in the following sequence: d3->d4->d5->d1->d2->d3. The factory
setting is d3.
5. Press the On/Off button to confirm the setting and to end the setting mode.
Setting
Amount of rinse aid (ml)
d1-> Rapid indicator is lit
d2-> 90 Min indicator is lit
d3-> Rapid and 90 Min indicator are lit
1.2
2.4
3.6
d4-> Clean indicator is lit
4.8
6.0
d5-> Rapid and Clean indicators are lit
EN 15
| General | Details |
|---|---|
| Name | ETNA VWV142ZWA Dishwasher |
| Make | ETNA |
| Language | English |
| Filetype | PDF (Download) |
| File size | 10.18 MB |
(1 votes, average: 5.00 out of 5)
Loading...
Whirlpool W2F HD624 Dishwasher
InDesiT D2I HL326 Integrated Dishwasher
FISHER AND PAYKEL DD24DTX6I1 Dishwasher
ASKO DFI8557MMXXL Dishwasher
ASKO DSD5444D Dishwasher
Whirlpool W11703656 Dishwasher
SIEMENS SN63EX03AE Dishwasher
INDESIT FDUD4212 Dishwasher
Hotpoint H8I HT59 LS UK Dishwasher
FISHER PAYKEL DD24DCHTX9 N Dishwasher