ETNA VWV142ZWA Dishwasher
ERRORS
What should I do, if...
If the appliance is not functioning well, this does not always mean that
it is faulty. Try to resolve the fault yourself first. If the recommendations
below do not solve your problem, telephone our service department.
Note!
Disconnect the appliance from the power supply before beginning
repairs. It is preferable if you remove the plug from the socket.
Error table
Problem
Potential causes
Solution
The dishwasher is not Fuse is faulty or the earthing
Replace the fuse or reset the isolating
switch. Remove other appliances that
are connected to the same group.
working.
switch has been activated.
The power supply is not
switched on.
Make sure that the dishwasher is
switched on and the door closed.
Make sure that the plug is correctly
inserted into the socket.
The water pressure is too low. Check whether the dishwasher is
correctly connected to the water
mains and that the tap is open.
The door of the dishwasher is Make sure the door is closed
not closed properly.
properly.
The drainage pump
does not shut off.
The water is running over.
The system is designed so that it
can automatically detect overflowing
water. In that instance, the appliance
shuts off the circulation pump and
switches on the drainage pump.
Noise.
Some noises are normal.
Noise of rotating pump/washing
noises; the detergent compartment
opening.
Cutlery is rattling in cutlery
basket or items of crockery
are loose in the dishwasher.
Interrupt the program and rearrange
the items of crockery. Ensure that
everything is loaded securely in the
dishwasher.
The motor makes an unusual The pump is blocked. Contact an
noise. installer.
A spray arm touches an item. Pause the program and re-arrange
the items so the spray arm is not
blocked when rotating.
EN 24
| General | Details |
|---|---|
| Name | ETNA VWV142ZWA Dishwasher |
| Make | ETNA |
| Language | English |
| Filetype | PDF (Download) |
| File size | 10.18 MB |













































































