Home > ETNA > ETNA VWV142ZWA Dishwasher

ETNA VWV142ZWA Dishwasher

MAINTENANCE  
Filtering system  
The filtering system in the base of the wash cabinet retains coarse debris from the washing  
cycle, including foreign objects such as tooth picks or shards. The collected coarse debris may  
cause the filters to clog. Check the condition of the filters regularly. Carefully remove foreign  
objects and clean the parts of the filtering system if necessary with water. Follow the steps below  
to clean the filters.  
Note: Pictures are only for reference. The models of the filtering system and spray arms  
can be different.  
Coarse filter  
Main filter  
Open  
Fine filter  
1. Hold the coarse filter and rotate it anticlockwise to unlock the filter. Lift the filter upwards  
and out of the dishwasher.  
2. The fine filter can be pulled off the bottom of the filter assembly. The coarse filter can be  
detached from the main filter by gently squeezing the tabs at the top and pulling it away.  
3. Larger food remnants can be cleaned by rinsing the filter under running water.  
For a more thorough clean, use a soft cleaning brush.  
4. Reassemble the filters in the reverse order of the dissasembly, replace the filter insert, and  
rotate clockwise to the close arrow.  
Warning! Do not over tighten the filters. Put the filters back in sequence securely,  
otherwise coarse debris could get into the system and cause a blockage. NEVER use  
the dishwasher without filters in place. Improper replacement of the filter may reduce  
the performance level of the appliance and damage dishes and utensils.  
EN 20  
GeneralDetails
NameETNA VWV142ZWA Dishwasher
MakeETNA
LanguageEnglish
FiletypePDF (Download)
File size10.18 MB
Download PDF
1 Star2 Stars3 Stars4 Stars5 Stars (1 votes, average: 5.00 out of 5)
Loading...

ETNA VWV142ZWA Dishwasher