Home > Frigidaire > FRIGIDAIRE GDPH4525SS Dishwasher
FRIGIDAIRE GDPH4525SS Dishwasher
OPERATING INSTRUCTIONS
8
To Start a Cycle
Delay Time
7
The Delay Time option allows you
to automatically delay starting your
dishwasher 1-24 hours.
When cycle and options are selected,
LEDs of selected cycle and options
are illuminated, and the LED above the
START/Cancel button illuminates.
To start the Delay Time option,
press Delay Time until the desired
delay time LED illuminates. A
light will come on indicating the
delay has been set and will remain
on until cycle starts. Press the
START/Cancel button to start the
delay option. If the delay option
is interrupted, the START/Cancel
button will have to be pressed again
to return to delay option.
To start the cycle, press START/Cancel
button and immediately close the
dishwasher door.
To Cancel a Cycle and Delay Cycle
Both a running cycle and a delay cycle can
be canceled at any time.
Open the dishwasher door and press the
START/Cancel button until the cycle and
option LEDs turn off. The running cycle or
delay countdown is canceled.
To cancel the Delay Time option
and to begin the selected cycle
before the delay period is over,
press and hold START/Cancel
button for 3 seconds.
Press the START/Cancel button and close the
door immediately to drain. After a 90 second
drain you may be able to select a new cycle
after canceling a previous wash cycle.
Control Lock
Opening the door during cycle
8
Lock the dishwasher controls by
pressing and holding the Control
Lock button until the lock LED
comes on to prevent children
from starting the dishwasher or
accidentally changing the wash
cycle. To unlock the controls, press
the Control Lock button until the
lock LED goes off.
If you open the door while a cycle is
running or delay is counting down, the
dishwasher will stop running.
The LEDs of selected cycle and options are
illuminated. The LED above START/Cancel
button will blink to press start.
To resume, press START/Cancel button and
close the dishwasher door immediately.
Operating Instructions
The START/Cancel LED illuminates solid
after the START/Cancel button is pressed.
If the dishwasher door is kept open for too
long, or the door is closed without pressing
START/Cancel button, the running cycle or
delay countdown will be canceled.
Getting Started
1. Load Dishwasher (See Preparing
and Loading Dishes).
2. Add detergent (See Dishwasher
Dispenser & Detergents).
Console Lights
3. Add Rinse Aid, if needed (See Rinse
Aid).
If it is desired to have the console lights
remain off while running, perform the
following operation: Prior to starting a cycle,
press and hold Heavy Wash and Rinse Only
simultaneously for approximately 8 seconds
until the corresponding lights flash. This
will turn the console lights off during cycle
operation. Simply repeat this operation to
revert back to the previous setting.
4. Run hot water faucet nearest
dishwasher until water is hot. Turn
water off.
5. Select desired Cycle (See Cycle
Chart).
6. Select desired Option (See Option
Selections).
7. To start, press START/Cancel pad
and close door immediately.
Floor Light Beam
Green Light
The GREEN LIGHT illuminates on the
floor when the wash is complete.
Blue Light
The BLUE LIGHT illuminates on the floor
to indicate that the wash cycle is
operating.
| General | Details |
|---|---|
| Name | FRIGIDAIRE GDPH4525SS Dishwasher |
| Make | Frigidaire |
| Language | English |
| Filetype | PDF (Download) |
| File size | 2.83 MB |

FRIGIDAIRE GDPP4517A Gallery Series Dishwasher

FRIGIDAIRE FDPC4314AS Dishwasher

FRIGIDAIRE GDPH4515AF Gallery Dishwasher

FRIGIDAIRE FFBD2406NB Full Console Dishwasher

FRIGIDAIRE GDPH4525AF Gallery Dishwasher

FRIGIDAIRE FDHP4336AS 24 Tall Tub Dishwasher

FRIGIDAIRE FDHP4336AS Dishwasher

FRIGIDAIRE FDSR4501AP Panel Ready Dishwasher

FRIGIDAIRE FFBD1821MS Dishwasher

FRIGIDAIRE FGHD2455LF Dishwasher



































