GERMAN DWH-121 Dishwasher
Installation Instruction
Installation Instruction
•
Tension Adjustment of the Door Spring
•
Dishwasher Installation Steps
The door springs are set at the factory to the proper tension for the outer door.
1. Install the furniture door to the outer door of the dishwasher using the brackets provided. Refer to
If aesthetic wooden panel are installed, you will have to adjust the door spring tension.
Rotate the adjusting screw to drive the adjustor to strain or relax the steel cable (see figure 5).
the template for positioning of the brackets.
2. Adjust the tension of the door springs by using an Allen key turning in a clockwise motion to tighten
the left and right door springs. Failure to do this could cause damage to your dishwasher (Illustration
2).
Door spring tension is correct when the door remains horizontal in the fully opened position, yet rises to
a close with the slight lift of a finger.
3. Connect the inlet hose to the cold water supply.
4. Connect the drain hose. Refer to diagram. (Figure 6)
【Figure5】
Tension adjustment of the door
spring
5. Connect the power cord.
6. Affix the condensation strip under the work surface of cabinet. Please ensure the condensation strip
is flush with edge of work surface.
7. Place the dishwasher into position. (Illustration 4)
8. Level the dishwasher. The rear food can be adjusted from the front of the dishwasher by turning the
Allen screw in the middle of the base of dishwasher use an Allen key (Illustration 5A). To adjust the
front feet, use a flat screw driver and turn the front feet until the dishwasher is level (Illustration 5B).
9. The dishwasher must be secured in place. There are two ways to do this:
A. Normal work surface: Put the installation hook into the slot of the side plane and secure it to the
work surface with the wood screws (Illustration 6).
B. Marble or granite work top: Fix the side with Screw. (Illustration7).
ip
r
t
s
n
io
t
•
Connection of Drain Hoses
a
s
n
e
d
n
o
C
3
Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink,
making sure to avoid bending or crimping it. The top of the hose must be less than 1000mm.
2
PLEASE FIX THE DRAIN HOSE EITHER WAY OF A, B
1
4
Front
Counter
Note
The top of the hose must
be less than 1000mm.
A
B
Drain pipe
【Figure7】
40mm
P.28
P.29
| General | Details |
|---|---|
| Name | GERMAN DWH-121 Dishwasher |
| Make | German |
| Language | English |
| Filetype | PDF (Download) |
| File size | 6.49 MB |
(1 votes, average: 5.00 out of 5)
Loading...
smeg ST-820-860 Fully- Dishwasher
Electrolux ESL63010 Dishwasher
LG LDTH7972D Smart Tub Dishwasher
Whirlpool FINPUTSAD Dishwasher
IKEA AA-2412050-2-1 LAGAN Dishwasher
INDESIT DF9E 1B10 S UK Slimline Dishwasher
Whirlpool 400011655817 E Dishwasher
BOSCH SMS4HAW40G Dishwasher
BOSCH SMV4EAX23G Dishwasher
FISHER AND PAYKEL DW60CHPX1 Dishwasher