GERMAN DWH-121 Dishwasher
Troubleshooting
Troubleshooting
Improper loading
Load the dishwasher as suggested in
the directions.
There are rust
stains on cutlery not corrosion resistant.
The affected items are
Too little rinse-aid
Increase the amount of rinse-aid/refill
the rinse-aid dispenser.
A programme was not
run after dishwasher
salt was added.
Traces of salt have
gotten into the wash
cycle.
Always run the quick wash programme.
Without any crockery in the dishwasher
and without selecting the Turbo
function (if present), after adding
dishwasher salt.
Dishes are removed too Do not empty your dishwasher
soon
immediately after washing. Open the
door slightly so that the steam can
escape. Begin unloading the dishwasher
only once the dishes are barely warm
to the touch. Empty the low basket first.
This prevents water forming dropping off
dishes in the upper basket.
Unsatis
-factory
drying
result
(natural
air drying)
The dishes are
not drying
The lid of the softer is
loose
Check the lip. Ensure the fix is fine.
Knocking noise
in the wash
cabinet
A spray arm is knocking Interrupt the programme, and
against an item in a
basket
rearrange the items which are
obstructing the spray arm.
Wrong program has
been selected
In short program the washing
temperature is lower. This also lowers
cleaning performance. Choose a
program with a long washing time.
Rattling noise in Items of crockery are
the wash cabinet loose in the wash
cabinet
Interrupt the programme, and
rearrange the items of crockery.
Noise
Use of cutlery with a
low-quality coating
Water drainage is more difficult with
these items. Cutlery or dishes of this
type are not suitable for washing in the
dishwasher.
Knocking noise
in the water
pipes
This may be caused by
on-site installation or
the cross-section of the If in doubt, contact a suitably qualified
This has no influence on the
dishwasher function.
piping.
plumber.
The dishes are
not clean
The dishes were not
loaded correctly.
See notes in “Loading the Dishwasher
Baskets”.
Error Codes
When some malfunctions come on, the appliance will display error codes to warn you:
The programme was
not powerful enough.
Select a more intensive programme.
See “Wash Cycle Table”.
Codes
Meanings
Possible Causes
Longer inlet time.
Not enough detergent
was dispensed.
Use more detergent, or change your
detergent.
Faucet is not opened, or water intake is
restricted, or water pressure is too low.
The 30 Rapid light flicker fleetly
Items are blocking the
path of spray arms.
Rearrange the items so that the spray
can rotate freely.
The Glass light flicker fleetly
Overflow.
Some element of dishwasher leaks.
The filter combination
Clean and/or fit the filter combination
in the base of wash
cabinet is not clean or is Clean the spray arm jets. See
not correctly fitted.
This may cause the
spray arm jets to get
blocked.
correctly.
Unsatis
-factory
washing
result
•
•
If overflow occurs, turn off the main water supply before calling a service.
If there is water in the base pan because of an overfill or small leak, the
water should be removed before restarting the dishwasher.
WARNING!
“Cleaning the Spray Arms”.
Cloudiness on
glassware
Combination of soft
water and too much
detergent.
Use less detergent if you have soft
water and select a shortest cycle to
wash the glassware and to get them
clean.
Black or gray
Aluminum utensils
Use a mild abrasive cleaner to eliminate
marks on dishes have rubbed against
those marks.
dishes.
Detergent left in Dishes block detergent Re-loading the dishes properly.
dispenser cups cups.
P.34
P.35
General | Details |
---|---|
Name | GERMAN DWH-121 Dishwasher |
Make | German |
Language | English |
Filetype | PDF (Download) |
File size | 6.49 MB |
