gorenje GI62040X Dishwasher
3. Position the dishwasher on a level and sturdy floor. If the floor is uneven, the front feet of the
appliance may be adjusted until it reaches a horizontal position (the angle of inclination must not
exceed 2 degrees). If the appliance is levelled correctly, it will be more stable and much less likely to
move or cause vibrations and noise while it is operation.
How to Keep Your Dishwasher in Shape
After Every Wash
When You Go on holiday
When you go on holiday, it is
After every wash, turn off the water supply
to the appliance and leave the door slightly
ajar so that moisture and odors are not
trapped inside.
recommended that you run a wash
cycle with the dishwasher empty and
then remove the plug from the socket,
turn off the water supply and leave the
door of the appliance slightly ajar. This
will help the seals last longer and
prevent odors from forming in the
appliance.
Connecting the water and electricity supplies
Connection to the water and electricity supplies should only be performed by a qualified
technician.
Remove the Plug
The dishwasher should not stand on top of the water hoses or the electricity supply cable
The appliance must be connected to the water supply network using new piping. Do not
use old piping.
Before cleaning or performing
maintenance, always remove the plug from
the socket. Do not run risks.
Moving the Appliance
If the appliance must be moved, try to
keep it in the vertical position. If
absolutely necessary, it can be
positioned on its back.
Connecting the water inlet hose
No Solvents or Abrasive Cleaning
To clean the exterior and rubber parts of
the dishwasher, do not use solvents or
abrasive cleaning products. Use only a
cloth and warm soapy water. To remove
spots or stains from the surface of the
interior, use a cloth dampened with water
and a little white vinegar, or a cleaning
product made specifically for dishwashers.
Connect the cold water supply hose to a threaded 3/4(inch)
connector and make sure that it is fastened tightly in place.
If the water pipes are new or have not been used for an
extended period of time, let the water run to make sure that
the water is clear and free of impurities. If this precaution is
not taken, there is a risk that the water inlet can get blocked
and the appliance could be damaged.
Seals
One of the factors that cause odors to
form in the dishwasher is food that
remains trapped in the seals. Periodic
cleaning with a damp sponge will
prevent this.
Warning
Connecting the water outlet hose
Attention:
Electrical Shock Hazard!
Disconnect electrical power before
installing dishwasher.
The installation of the pipes
and electrical equipments
should be done by professionals.
Fit the drainage hose of your machine to the drainage pipe
without bending.
Failure to do so can result in death or
electrical shock.
If the length of the hose is not sufficient, apply to the
authorized service for an extension made from the same
material as the original. Remember that the length of the
min 40mm
hose should not exceed 4meters even when with an
8. Installation
extension.
Keep this instruction manual in a safe place for future reference. If the appliance is sold,
given away or moved, please ensure the manual is kept with the machine, so that the
new owner may benefit from the advice contained within it.
If the drainage hose is longer the 4 m. the dishes will not
be cleaned properly secure your hose firmly to the drainage
pipe to avoid it coming off during the washing process.
Please read this instruction manual carefully: it contains important information regarding
the safe installation, use and maintenance of the appliance.
If the appliance must be moved at any time, keep it in an upright position; if absolutely
necessary, it may be tilted onto its back.
Electrical connection
Before inserting the plug into the electrical socket, make sure that:
Positioning and leveling
●the socket is earthed and complies with current regulations;
1. Remove the appliance from all packaging and check that it has not been damaged during
transportation. If it has been damaged, contact the retailer and do not proceed and further
with the installation process.
2. Check the dishwasher by placing it so that its sides or back panel are in contact with the
adjacent cabinets or even with the wall. This appliance can also be recessed under a single
worktop .
●the socket can withstand the maximum load of the appliance, which is indicated on the data plate
located on the inside of the door(see description of the appliance);
●the power supply voltage falls within the values indicated on the data plate on the inside of the door;
●the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised
technician to replace the plug (see assistance); do not use extension cables or multiple sockets.
For optional
19
18
| General | Details |
|---|---|
| Name | gorenje GI62040X Dishwasher |
| Make | Gorenje |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.46 MB |
(1 votes, average: 5.00 out of 5)
Loading...
gorenje GV673B66 Dishwasher
gorenje 642D65 Dishwasher
gorenje GV673A61 Dishwasher
gorenje GV642C65 Dishwasher
gorenje GV673B60 TotalDry Dishwasher
Gorenje Voll-I GV 64x B Dishwasher
gorenje GV693C60XXL Dishwasher
gorenje GI52040X Dishwasher
gorenje GV62040 Dishwasher
gorenje GV52040 Dishwasher
GE APPLIANCES GDF511PSR-PGR Dishwasher with Front Controls with Power Cord
IKEA 704.756.17 RENODLAD Dishwasher
kogan KAM15PDWFSA 15 Place Dishwasher
SIEMENS SE23HI60CE Dishwasher
INDESIT DFE 1B19 UK Dishwasher
FISHER and PAYKEL DD60SDFTX9 Tall, Dishwasher
FISHER PAYKEL DD24DTX6HI1 Sanitize Integrated Dishwasher
FISHER PAYKEL DD24DTX6PX1 Tall
Whirlpool 2B19 Dishwasher
KitchenAid KDFE104KBL Front Dishwasher