gorenje GI62040X Dishwasher
Water hardness and Indicator light status table
Dishwasher Features
Water hardness
Set value on
Mmol/l
Indicator light Status
(LED10+LED11+LED12)
the machine
Clark
Range
Front View
Light+Light+Light
Light+Light+Flash
Light+ Flash +Light
Light+ Flash +Flash
Flash+Light+Light
Flash +Light+ Flash
Flash +Flash +Light
Flash +Flash +Flash
0-8
9-10
11-12
soft
soft
0-1.1
1.2-1.4
1.5-1.8
H0
H1
H2
1 Upper Basket
2 Spray Arms
medium
1
2
3 Lower Basket
13-15
medium
1.9-2.1
H3
4 Water Softener
5 Cutlery Basket
6 Detergent Dispenser
7 Rinse Aid Dispenser
16-20
21-26
27-38
39-62
medium
hard
hard
2.2-2.9
3.0-3.7
3.8-5.4
5.5-8.9
H4
H5
H6
H7
5
3
4
hard
6
7
B. Loading the Salt into the Softener
Always use salt intended for using with dishwasher.
NOTE: If your model has no water softener, you may skip this section
4．Prior Using for the First Time
Before using your dishwasher for the first time:
A. Set the water softener
WATER SOFTENER
The hardness of the water varies from place to place. If hard water is used in the
dishwasher, deposits will form on the dishes and utensils.
The appliance is equipped with a special softener that uses salts specifically
designed to eliminate lime and minerals from the water.
B. Pour 500ml of water inside the salt container and then fill with dishwasher salt
C. Fill the rinse aid dispenser
D. Function of detergent
The salt container is located beneath the lower basket and should be filled as follows:
Attention!
A. Water Softener
The water softener is designed to remove minerals and salts from the water, which would have a
detrimental or adverse effect on the operation of the appliance. The higher the content of these
minerals and salts, the harder the water is. The softener should be adjusted according to the
hardness of the water in your area. Your local Water Authority can advise you on the hardness of
the water in your area.
Only use salt specifically designed for use in dishwashers! All other types of salt not specifically
designed for use in a dishwasher, especially table salt, will damage the water softener. In case of
damages caused by the use of unsuitable salt the manufacturer does not give any warranty nor is
liable for any caused damages.
Only fill with salt just before starting one of the complete washing programmes.
This will prevent any grains of salt or salty water, which may have been split, remaining on the
bottom of the machine for any period of time, which may cause corrosion.
After the first wash cycle the control panel light expires.
Setting
The amount of salt dispensed can be set from H0 to H7.
Salt is not required at the set value H0.
1.Find out about the hardness value of your tap water. Your water utility company will help you with this.
2. Set value can be found in the water hardness table.
.
3. Switch on " Power ".
4. Hold down "Delay" button and then press "Program" button for 5 seconds.The buzzer rings
one time and indicator light.
(Please refer to table for water hardness and indicator light status: factory setting is H4.)
To change the setting:
1. Press "Delay" button.
Each time the button is pressed, the set value
increasesby one level;when the value of H7
has been reached, then jumps back to H0(off).
2. Press "Program" button. The chosen setting
has now been stored.
LED10
1
2
LED11
LED8 LED7
LED3
LED4 LED5
LED1
LED2
LED12
A. Remove the lower basket and then unscrew and remove the cap from the salt container.
1
B. If you are filling the container for the first time, fill 2/3 of its volume with water (around 500ml). 2
5
4
| General | Details |
|---|---|
| Name | gorenje GI62040X Dishwasher |
| Make | Gorenje |
| Language | English |
| Filetype | PDF (Download) |
| File size | 3.46 MB |
(1 votes, average: 5.00 out of 5)
Loading...
gorenje GV673B66 Dishwasher
gorenje 642D65 Dishwasher
gorenje GV673A61 Dishwasher
gorenje GV642C65 Dishwasher
gorenje GV673B60 TotalDry Dishwasher
Gorenje Voll-I GV 64x B Dishwasher
gorenje GV693C60XXL Dishwasher
gorenje GI52040X Dishwasher
gorenje GV62040 Dishwasher
gorenje GV52040 Dishwasher
